Viewing all customer Discussions for:

15-015 Pivot Shoe, 17/32" Thick

Good morning, l talked to one of your reps last week who advised me to send these pics. The length of the balance is 22" for each of three windows. Iam going off memory so that number may change. I am not savvy on using my phone to do this but l will try to send 4 pics. Thanks

The 15-05 dimensions appear to match my shoe. What are the inside dimensions of the pivot?( Blue plastic cylinder)

I am looking to replace all the components in my front window. Here are pics of the working balance parts in the window tracks. if you have these parts or a replacement for them please let me know. I also need the balance's i will send you those dimensions if you have these components and order them ... (cont.)

I want to replace all my window locks. I have 2 on each window. Is your model 90-077A the correct replacement? From screw hole to screw hole is 2 1/16 inches and the base of lock is 1 inch wide. Thank you.

Hi folks at Swisco-- We have old aluminum tilt windows with no company name but "1977" stamped on the metal. We purchased a spiral balance charging tool from you, and tried to tighten up a window with it (top half slides right down). Of course, the pivot shoe broke. So, we are need of replacemen ... (cont.)

I have a 30 year old home that has tilt out double hung windows installed. I need to replace the pivot locks but I cannot locate any manufacturer's Product labels. And, I am unable to remove the pivot locks to measure the thickness. However, I did find a label with an MFGR Code AC-4 and series 2048 ... (cont.)

I attached four pictures of the Pivot shoe that we discussed. Please advise your product number that matches this pivot shoe. When you find the comparable pivot shoe, I also think that I will need the appropriate pivot bar and changing tool. Thanks

Some of the pivot bars have rusted out and left part of it in the shoe. Attached please find images of the window label, pivot bar and shoe. Pivot bar dimensions are exact (possible 26-068) 3" length 5/16 outside thickness 3/16 inside thickness. Approximate shoe dimensions are 2" height, 5/8" thick ... (cont.)

Hello, First of all, this is a great site. Very helpful. I am wondering if there is a pivot shoe I could use instead of 15-015, that would allow for easy removal of an entire window sash? The type that you can just lift the window out of the slots when in tilted position... Thank you. ... (cont.)

I have two broken parts, the pivot shoe(on the left side of the window) and the part coming out of the window which fits into it. I am not seeing a pivot bar that looks like it on your website yet I take to pictures of the pivot shoe on the right side where it is not broken. However, now after ... (cont.)

Hello, Attached is an image with dimensions of the pivot block I need to source for my client. I've found your site helpful, but am not confident I've found the right shoe, based on the shape of the metal top plate and the shoe itself, even if I get the right dimensions. Can you help? Than ... (cont.)

I have season all aluminum double hung pull out windows , I need parts for the sash locks and other parts , do you stock them ?

Part #1 I see the number 3 inscribed on the gold piece of the part. Part #2 On the underside, I see the letters c-ANY and 1356 Part #3 on the Front Side has a P52 and then at the bottom it says lock and on the back of part 3 it has a P51 and P61 and a number 5 as well.

I don't know the name of the window company. Looking for some expertise helping locate the proper pivot shoe. The depth of the window channel is 1/2". The pics show the measurements for the other sizes.

Can you help me get a replacement part for these windows? thanks John

Looking for pivot shoe with patent number 3055062

1 15/16 x 17/32 X 1 9/32

I will need two 23" balances (red)requiring 2 brackets (pictured) (two 23" balances) (two 19" balances) all red and 6 brackets (pictured) (two 18" balances) a pair of locking mechanisms (pictured) pivot shoes, photos attached for identification. Measurements, as near as I can ascerta ... (cont.)

I need a part for a window job I'm doing here in Charlotte. The window is a tilt and it looks like it has a set screw on it.

These glides are installed on vinyl windows that I believe to be at least 20 years old.