Viewing all customer Discussions for:

15-015 Pivot Shoe, 17/32" Thick

Hello, I need help to identify and replace parts for a double hung window. I need: Spiral tilt balance Pivot bar Balance shoe I have one window with about 28" for each sash (length of the spiral tilt balance) and one window with about 32" for each sash. Thank you

Hi guys... I need help... I also have a broken window.. Maybe you can help with the window ? Years ago (maybe 10) a little metal thing fell out of the track (Side) and the window got heavy.. The one on the other side fell out.. then I couldn't move the window at all(I'm 5'2" and 85lbs) Hubby is gonn ... (cont.)

I have a window that won't open/go up; I removed the bottom sash and looked in the track. I think I need replacement shoes. The first pic shows the shoe part but the balance is not attached to it. The second pic shows other side of window; looks like shoe piece is broken at top and nothing for balan ... (cont.)

The part on the side of window jam that slide up and down and holds balance spring.

Can you please help me identify these two pivot shoes?

This original window pivot says 530C on it. I bought a swisco 15-015 as a replacement, it is very similar and would work except the thickness of the pivot hole is shallower, and my tilt window falls out of it when fully mounted. The original sticks out of the mount a bit compared to the 15-015, whic ... (cont.)

Hi I am looking at replacing these sash units because my windows are all falling down when I try to open them, and I cannot keep them open on their own. Wondering if you can help me with replacement parts and a how to, for replacing these?

Please check out the attached pictures. I'm seeking to find similar pivot shoes for a double hung, tilt window repair. The window uses a red spiral balance tube of approximately 30". The diameter of the spiral balance tube is larger than 1/2 inch. The spiral itself terminates in a double cross p ... (cont.)

Purchasing a home. Thermo Tilt 5000 windows failed inspection because the lower pane will not stay up when raised. Was informed the white plastic balance on 3 windows needed to be replaced.

We had Graef windows installed in our public housing apartments back in 1998. We are running low on the pivot part. I have tried to contact Graef Window Corp. & they are no longer in business. Not sure what the part is called, but I have attached a picture of the part needed & a few pictures of ... (cont.)

My pivot lock shoe measures 2" high by 1-1/4" wide but the depth is 5/8 not 17/32 like this shoe. None of the other 5/8 shoes looks like mine. Would that small difference in depth be a problem

Bottom of balance that pivots and connects to window

Can you identify this window shoe?

My photo titles: 38 inch means 3/8"; 58 inch means 5/8". I have old windows made in 1980. I bought this place just days back and got installed new spirals but could not find Pivot Lock Shoes. My contractor worked on that for me. Now the windows are great but they dont stay up. My contractor sa ... (cont.)

Can you help me find the correct Channel Balances for my Pella Double hung windows? I attached 2 photos of both ends. It appears to be a 26C BSI TL stamp. They are 26" long. I bought the 795 series channel balances from your website the website tool led me to think these were the correct ones. ... (cont.)

We have single hung bottom tilt-in Windows that were put in when our home was built 23 years ago. The Windows do not stay open or can be difficult to open. Will replacing the part fix the problem? Is so, can you supply the part? Thanks, Sharon

I measured the channel depth to be 9/16. I assume 15-118 is the right size. I want know if I should buy one size smaller, perhaps 15-015

I believe these are 900 series. They seem like 3/8 thinner type but measure about 1/2" Can you identify the shoe?

Please identity part number, Pat. Number is visible

Gentlemen, My vinyl windows are dated (on glass mullion/spacer) 81 (1981). They may have been sold through Sears, but I can't be certain. First attached composite picture shows my existing hardware, and a detail of one of your pivot shoes that has the same cam slot dimensions as my shoes. ... (cont.)