Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

On the casement operator, long arm is 13.5". Do you agree 39-406 makes sense? On the hinges, the base plate is 10". The window strip is around 7.5". The shorter bar back to the base plate is right at 5". Seems like 36-048 would be needed. These are all right side. If you concur, what are the ... (cont.)

Hello, I have casement windows that are from 1982 era. They were manufactured by a Joliet, Il company called ROW, no longer in business. I am looking for left hand and right hand side crank arms, can you please assist?

Contractor for a glass company here, just can't quite locate this casement arm. Looks to be a Truth #30744B, old one got so rusted that the pivot point where it attaches to the sash rusted off, so just need that pivot arm w/ rail.

Hello, I am looking for a single arm operator for a left hinged, operating casement window-I know the picture shows a right hinged--we cannot open the left to get a picture.

Is this available?

Hi! Please see attached photos. Hoping you can help order the right part. Please let me know if you need any additional measurements. Thanks!

I think it's Casement window operator 13-1/2" arm 39-014 & 39-013. On one arm I see the word Truth. Handles I'm not sure of part or brand.

Am looking to purchase like hardware for a casement window. I need the hardware for the sill mechanism and the track for the bottom of the window. The pictures shown are from the opposite window I need the parts for. The parts window (standing outside the house) is on my left side. Thank you! ... (cont.)

Markings: RH, 1Z,

Are you able to identify these operators?

Help

I'm looking for a right hand and a left hand casement window crank.

Looking for 2 left and 2 right crank hardware; one lock as pictured and one part that the window sits on photo 3 red arrow. Any help greatly appreciated.

I am looking for a left and a right operator for casement windows. I am having a hard time locating these. The arm length is showing as 11" if measure from the mechanism and if measured from the elbow to the end it measures 9 1/2".

I need replacements for both right and left. Inside cover reads Biltbest Part 233 D.C.

Window pivots from the left to open clockwise. Single arm. Colors is like a bronze???

Hello, I have six casement windows (three right, three left) that have problems with the operators. For the most part, the issue is that the arm falls out of the track on the sash when attempting to open/close the window. In two of the windows the crank no longer moves the arm. Photos with measur ... (cont.)

I need to replace both the left and right operators on a casement bow window without identification markings. The gears on both operators is either stripped or missing. The throw arm length is about 12 inches from the jamb to where it meets the track on the sash bottom.

I want to replace the crank and handle on my casement window. What parts should I order?

I need a right and left for craft line casement windoed 2 numbers are seen 7073b. L. 30350 is on a piece too