Viewing all customer Discussions for:

39-015 Roto Gear Window Crank, 25-1/2"

The hardware says Entry Guard Truth and 20810

Aloha,Please let me know if this type of awning crank is still available, or a suitable replacement. The Milgard windows were installed in the early 90's with a stucco exterior and plaster interior, so we would like to avoid having to replace the entire windows.The side "hinges" need to be replaced ... (cont.)

Hi. I have a video of this crank in action. It will open the window, but on reversing the direction of the crank, it just unscrews itself, and the window does not move. I can close the window by pushing from the outside while lightly turning the crank inside.

The window crank housing threads for the brass retainer appear to be worn and damaged so will not lock in the main crank stem.

I need replacement crank assembly for my marvin casement window. The spread of the arms when closed is approx 23". The crank is in the center of the window at the bottom. The crank doesn't close the window, instead the handle threads itself out of the housing

Hello ? I am looking for this part please for an awning window? Truth 40245 Can you tell me if you have this , and how much would it be.? And if so, how can I place the order for it . Thank you

This is the code I found on the windows i'm looking currently to replace the gold/taupe tone parts, crank, crank cover, lock and screen to a white color. Can you help me? For this purchase immediately will need for 6 windows, but possibly more depending on lead times, costs, etc. I have approximat ... (cont.)

The crank broke and we cannot open or close our window. It looks like it is the bracket that broke off. Do you have the part or a whole crank system that would work with our push out window? Thank you for any assistance you can give.

Hi,I'm looking for a replacement crank mechanism for a window in my house. I do not know the manufacturer.The measurements:Part closest to crank: about 10.5 inches (11.5-12 in if you count the curved part closest to the window sillThe next part is 6.5 inchesThe back part (that clips on the window) i ... (cont.)

Need the spark plug looking part and the brass collar. 6 each

I need replacement hardware for these awning style windows with Truth hardware. I'm not sure of the age but my guess is they are 20-30 years old.

This part became severely rusted and unusable. The rest of the window is in good shape. Any help you can provide with replacement part would be greatly appreciated. Wording on part is: "US PAT 4505601" - "PAT.CAN 1986 - "Truth" - "Made in USA" - "45301" - "3". Dimensions are 8 inches ex ... (cont.)

I need to 2 regulators pictured..when open it is 25 1/2 ' long..the rivets by the slots are 9 " apart. Thank you.

Do you have this part? # 45206

I am looking for a replacement operator. One arm is marked 'Truth'. Full collapsed it measures 25 1/5 inches end to end. The distance between the connection points on the connection are is 9". It is a dual operator device and is a sill mount component. Please let me know which operator would re ... (cont.)

The house is about 20 years old, and we can't find this operator at any local window place. There's two arms that are equal length and measure about 18 to 18 1/2" from the end to the operator. The arms habe a weird joint/hinge about 3/4th of the way down. Can you please help us locate a replacement ... (cont.)

Looking for a replacement peachtree awning window operator ... Marings on the operator are 1 Truth 45206 arms 30897A

Looking for this crank. It is Ambebury Truth I believe. It is 25 trip to tip, 9" hole tp hole for the screws

What part do I need?

13 45054 is on the handle of this Clausen window handle. The large opening on the handle measures 11/16 and the smaller on the handle itself is 6/16 of an inch. I also need the base that the handle fits in. Thank you!