Viewing all customer Discussions for:

39-015 Roto Gear Window Crank, 25-1/2"

i have 2 bathroom windows (approx 28w x 18h) that i removed the cranks from, due to rust (they were frozen and open 1-2" year round). My neighbor got parts from you for a similar window, but his dual arm crank looks smaller (39-140). I'm guessing i need the 21.5" size (39-083) to match the photo i s ... (cont.)

Hello, Looking to replace my window crank mechanism. The arms measure 25" across when closed. The part attached to the underside of the window measures 10". There is no identification on the part But I am fairly certain that it is a Fiberlux brand. Thanks, Mark

I need to replace this operator

Hi the window opening mechanism stopped working on my casement window. I couldn't find any identifying marks to tell what brand it is. Can you help please? Thanks!

Hi, the screw mechanism is no longer working for our casement awning window. Could you help us figure out what we need to replace? Thanks! Elizabeth

Need help identifying this window crank mechanism. Need replacement.

Hi Needless to say I need this unit + the crank handle

Alex s door problem

I've measured elbow to elbow and my casement window crank is 25 1/5" when closed so I'll be purchasing 39-015. Which crank handle is compatible with this product? My current handle is secured with a small screw but not sure which one will be best for 39-015.

I'm looking on your website for window cranks. I see similar ones, but not the exact match. I'm sending a picture of what we have. My window is 13" at the pivotal points. What crank do you have that will work ? Thanks.

Hi. We have multiple window cranks that are stripped and need replacing. The cranks operate awning windows. Can you help me find the crank that is in the picture?

Have a couple windows like this that do not have the opening hardware. Any help with what replacement parts are would be extremely helpful. Thank you.

I am retired from the window industry and thought I "knew it all." However, We have just purchased a home built in about 1993-1994 that has Caradco casement and awning windows. The operator crank has a metal cover (verses the plastic pop off type) and I can't figure out how to remove it. Could yo ... (cont.)

Hi, I was wondering if you all have a replacement for the attached photos, or if I can use different parts in place of these? The attached pictures are of the awning window operator and sash lock. The house that these parts are from was built in 1967 and I believe the window and hardware are Anderse ... (cont.)

Need full replacement assembly or at least the operations mechanismBut not sure how to take it apartDon

trying to find the best replacement for this operator it looks like part #39-083 but the overall of existing is 21.5" part #39-070 overall length would work better, but the crank mechanism looks incorrect. please advise

Hi. Do you have this mechanism in stock?

Im looking for a standard Thomson awning window operator replacement. There is 3 screws to hold the operator done, 5-3/4" between the 2 outside holes. There are 2 arms about 18". The arms connect to a sliding track on the window

On andersen site they said replace with part 1521608,thanks the arm is attached to window with a latch that allows for easy removal -ANDERSEN AWNING OPERATOR KITProduct Code: 39-206from your site this looks like the replacement the only difference is the window attachment hardware is 6 15/16 on your ... (cont.)

I can not find the subject operator with a 13 inch spreader arm with 2 connector sockets