Viewing all customer Discussions for:

39-025 Awning Window Crank Operator

Hello! I have about 8 awning windows that were installed new about 10 years ago so not too old. The location is on the Jersey shore so sand is always an issue with the gears which I'll be cleaning and lubing (silicon spray) on a regular basis going forward based on your site's recommendations. ... (cont.)

HI, I need help finding these cranks. No names, ID #s or anything anywhere. They are white aluminum,4 panel -about 36" by 62" (? framed in so can't be sure). The cranks are on the right.From the bottom 2 mounting holes to the third top hole it is 5 and 1/4". The bottoms mounting holes are about 1 ... (cont.)

Hi Swisco, Here are photos of what I am looking to replace/repair. Product 39-194 is close; all measurements correspond EXCEPT for the 3/8" hole (mine is 3/16). And as I mentioned- when all folded in, on mine the arms fill the casing. Thanks for your help!

Gentlemen,can you help me find a replacement crank for a awning window (I have been told) to me it looks like a oversize jealousy window. Inclosed are pictures ,it is a right hand looking from inside.

window crank #39-205

I've got a an identically housed awning operator with a slightly different series of dimensions than product number 39-025. Mill Finished Awning Operator Miami Type Type 2 Classic Style Housing Right Hand Dimensions A: 5 1/4 in B: 1 1/8 in [VERSUS 1 3/16 in for 39-025] D: 2 3/16 in ... (cont.)

My mistake! My E-mail address is wrong. Can you please correct and re-send? Thank you!! --mike

Good morning! Please take a look at both pictures, one of them has a replacement crank for the windows and the other is the one that needs to be replaced. You will see the arm is stripped and I am not positive of how to replace this. It appears that there are replacement cranks(Gray window crank in ... (cont.)

I need to replace a couple of these crank openers. There are no markings. Which one do I need?

I need 2 window cranks for old casement windows. Here are 2 pics

I posted these last week. the cranks have been breaking and are glued back together by a local handyman, but we want to replace them, 5 to start. I think I see the replacement on your site, please give me the part and ordering procedure. Bill

Looks like the 39-025, but not sure.

There are no markings on the part. Application is to operate horizontal windows on an enclosed sun porch. There are both left and right operators.

I have been unable to locate the correct window crank. Dimensions are noted on picture and are all center to center. They are 5 1/4" top to bottom, 2 1/2" arm, 1 3/16" bottom mounting screws. Please let me know if you need any additional information. Thanks...Keith

Please provide the cost of enclosed window operators. At this time we need 20 operators.. The enclosed images provide the measures. Thanks.

I'm trying to order part #39-007, but there is no option to order. Wondering why or if there's a replacement part number?

Is the 33-206 the right size, or the 33-207? Thanks!

I talked to Steve yesterday for help in identifying a replacement operator for an awning window. He asked that I send photos of my operator, three photos are attached. It's a right hand operator. The distance from the top screw to the bottom screw is 5 1/4 inches. The two bottom screws are adjacent ... (cont.)

Good Morning, My window Operator Thank you, Bob

Vintage 1985