Viewing all customer Discussions for:

39-025 Awning Window Crank Operator

Don't know the maker and there are no markings on the cranks.

Is there a generic window crank because I see a lot of cranks for specific window manufacturers

Hello, I will need parts for these awning windows. They were installed in 1967 in Massachusetts. The windows have absolutely no markings or any idication of the manufacturer. Thank you. Paul Wheaton

HelloI am looking for a window clip and screw part along with a crank handle for the window - this os a "sun room " from the 70's . I semt pictured above . Thank youVivian

I'm trying to find the replacement handle for one of my sunroom windows, but the part doesn't have any part numbers or identifications.

I have a broken awning window lock. (Hook shaped part that pulls window in tight when closed) Unfortunately I don't have a picture of the part, removed. I don't see a name on the window anywhere.

Need help with awning window crank operator product code: 39-025. I replaced window crank operator but it won't open all the way need help thanks.

Hello!I have 13 right and 2 left operators I would like to replace in a home in southwest Florida. The patent number D 198202 was found embossed in the metal cover. Could you please identify these parts for me so I may completely replace all?Thanks for your support,Wayne.

There are no names or numbers on any of the crank parts.

From what I can tell, the measurements you give for the 39-012 are essentially the same as my operator that died. My concern is the connection of the operator arm to the awning window movement system: In my case there was a screw assembly shown in pictures which had a female internal threads (and s ... (cont.)

I'm located in South Florida there must be over a thousand units that have Windows like these. The problem is this there's three windows in a row from top to bottom when you crank the window closed apparently it shifts upward and locks in to the hook you're seeing in the picture. On one side of the ... (cont.)

I believe I need 39-025 but I am not 100% sure. It is 5 7/8" long x 2" at its widest width. I want dark bronze.

Looking to replace an Awning Operator - Copied the parts I used prevuously from a different company

Guessing circa late 60s, need 5 operators and other parts.

Inside of handle says -11500-11 patent pending Bottom of mount has the letter K Arm says 78 Middle joint of arm says 91 (underlined to show it's 91 and not 16) Arm needs to have the nub (thread bushing??) so it can attach to the outside arm Photo with drawing of measurements attached. 5 1/4 betwe ... (cont.)

I bought the 39-016 operator. It's a pretty close, but not a match to my original. What should I Do?

I have old casement windows and I am having trouble finding a replacement crank that fits the window. Do you have cranks that might fit I will add a picture of the crank.

Hi all, Hoping to confirm a part number for 6 left hand replacements. Hole spacing is 1 1/8 x 5.25 with a 2 3/8 arm. Some of the arm attachments seem to be via c-clip and others by threaded grommet. Also looking for an extended or straight crank handle. One was installed in a corner beside a door ... (cont.)

Greetings- Does the 39-025 also come with the screw that attaches the linkage to the crank operator? I see it in the product picture but want to be sure it's included. If not, what is the part number for that screw? Thank you!