Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

my window crank handles (2) don't work. where can I get two more that will fit? or is the receiving part stripped? thank you.

Looking to have this replaced. Please advise.

Hi there. I need 2 sets of right and two sets of left handed. Cannot locate by part number that is stamped on it. Maybe you can help? Arno

I have Pozzi windows circa 2002. The gears are beginning strip on the mechanism to crank out the windows. I'm including a picture of the arm mechanism from one window and the gear mechanism from the window which needs replacement.

20810A is found on the linkage arm in above photo. The window needing this replaced is the left side window when looking at it from inside the house.

Please find enclosed photos base rectangular 2-1/4 x 5". rotator (middle 2 round) length of solid bar 9-1/2" 2nd arm with the two pieces together 8" before it meets to the joint 4-1/2" R30842 marked on the operator. Long arm stamped entry guard Truth I do not believe your 39-032 coul ... (cont.)

My crank mechanism shows a part number #40372 but I do not see this number on your web page. Which number do I order? Thanks you

The Marvin part number is 108155501 and it's from a casement window circa 1991. I believe the part number 39-032 is a match.

Just moved into home. Everything know about window mechanisms in pictures.

Hello can you tell me if this operator I have is the one you carry? Mine is also stamped 45179. I need a left and a right operator that includes the housing, handle and cover.

Crank out window. split arm, similar to pre 98 Anderson. Just replaced both pre and a post 98 andersons in my house. the split arm has same slide clip to connect to post can take better pic in morn if needed.

Hello...could you please identify and then recommend a replacement part for this broken casement part. I believe that the part markings (R) indicate that it is a right facing operating mechanism. I mention this because I will need a left facing operating mechanism as well...thanks Tom ... (cont.)

I need help with replacing a Kolbe & Kolbe window crank assembly. The gears are not engaging and the interior components keep coming unscrewed when trying to open or close the window.I just need the internal working mechanism as the arm and handle are fine. Thank you.

How do I measure the size of my casement window operator? I need replace two of them. The model number is 30842R for a Truth Hardware Entryguard operator. Thanks SteveEntryGard TRUTH 20810

I am going to replace a Pozzi window operator, the pictures have the refrence numbers: Base: 40372 and 30830 in the barrel casing Arm: 308242R Arm with clip(free arm): 20810 Window opens to the left. Could you let me know what part number, operator cover and crank handle. Thank you ... (cont.)

I've attached photos of the window mechanism for my casement window that needs to be replaced. Do you carry these parts? This is for the right side and I would also need the left. Thanks! Jeanne Burkett

Is this picture good enough to determine which one I need? I do not see on your site.

I've been hunting online for 2 days now trying to find the replacement crank for a window we are fixing. It is an EntryGard Truth 20810, the other numbers on it are; 30744 & R30842. This crank has a gear wheel on either side of the handle shaft, I've been unable to find an exact match. One of you ... (cont.)

EntryGard mounting bracket 40254 and gear assembly 30471 short articulating arm 20544 and 30637 long articulating arm 30472 R.H.

I need a replacement for an Truth EntryGuard. The other demensions are the same 10-3/4" on are and 4-7/16" on the arm. The offset on the arm with part #20810 is down on mine, I can not tell which direction the arm on 39-032 is.