Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

I need to replace a window crank on my mother's window. Inside the house, it would be the right window as you face the set of 3 windows side-by side. The crank on the left window has R30842 imprinted on it, but I need the opposite one for the other window. Someone did replace it for her a few ... (cont.)

I am replacing a Truth Entrygard window arm operator for a casement window opening out and locking on the right (hinged at the left) where the link arm is just over 3 3/4 inches long. Can you recommend a replacement part, because on your site I only see options longer (4 7/16) and shorter (2 13/16) ... (cont.)

Hi, these were on Malta windows from 1998 and we need to replace the sash and the crank. Do you have a part that will work? Thanks, Jacque L, REALTOR REMAX Checkmate

Good afternoon - the crank assembly in one of my house windows has gone bad. It no longer cranks the window inward. This is a left-side opening window, with part number R30842 stamped on one of the arms. The housing has worn away and cracked, which I assume is part of the problem. The crank arm ... (cont.)

Dear Swisco, I hope you can help me. My house is 19 years old and the windows came with the house. Four of the cranks no longer work. Not sure where to find the replacement parts or what is involved in repairing the cranks. If you have the parts please advise re cost and ordering specifics ... (cont.)

Looking for a more cost effective operator replacement.

The window crank piece had broken and items from inside the unit are attached and shouldn't be.

Hi, I have attached some pictures of my crankarm. From another post/response I am pretty sure it is the 39-032 crankarm I need. Can you confirm this or send me in the right direction. The long arm measures 10 3/4" (same length). The short arm measures 4 7/16" (same length). Part numbers - mai ... (cont.)

Hi, My part that I need to replace is from a K&K window and its dimensions match your part 39-031. However, as shown in my photo, the bend or kink in the short arm of my original is in the upward direction. What direction is the bend in the 39-031 and can I use it to replace my part (as I said, th ... (cont.)

Please see picture The long arm to pull in the window is 9" The two other arms are about 4" and 5" It is bronze Randy 303 718-3507

The arm says...Entry Guard, then there is a picture of a house on it and then the word TRUTH is on it and is underlined. There is also a number that is 20810. The frame of the window is wood and I believe that they are original from the 1970's

I have three windows that need new replacement cranks. I have attached photos of the existing units. The

The only number on the piece that I can find is 31538. Does this help. Please let me know if you have a replacement for this crank mechanism. Thanks, Pat

Hello. I need a replacement for this Truth casement window operator. It is a dual arm and probably was manufactured around 1990. I looked at the Truth web site and the closest there is the Entrygard Dual Arm operator. But the gear for the smaller hinged arm for my part is not located in the same pl ... (cont.)

I have those number at my window closer 30637, 20810, 40372 . what is the mach number for your parts . i need 3 sets. Are those number belong to entry gard closer. thank you

Hi, I need to find replacement parts for two vinyl crank style windows. I need a replacement crank handle and two locking mechanisms. I believe the manufacture is Empire Windows (Now Cascade Windows?). I attached an overall picture and a close up of the sticker. Thanks!

PLEASE HELP TO IDENTIFY THE CASEMENT WINDOW OPERATOR WITH CRANK, COLOR: WHITE, I ASSUME IT'S THE RIGHT ONE, I NEED 2 OF THEM.

Hello, I was wondering if you might be able to identify this part for me? The number stamped on the crank piece is 20810 and the # stamped on the underside of the end piece is 20545 I've attached a jpeg. Thank you Martin

Want to replace covers and handles of 1983-1 Marvin casement windows with folding handle and covers. Quantity 3 - 2 right hand and one left. Marvin states that Part 10814854 (ant. brass) handle, flip is correct part, but am quoted a price of $244 for each! Opening is 5" current cover 5- 1/8", cen ... (cont.)

Please find attached a photo which will hopefully help describe what I'm looking for. This photo is not of the broken operator, but it is a similar casement window (left-operating). The cover to the operator has "MW", which I am told is a PlyGem company. That section of the splined knob that ins ... (cont.)