Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

I do not know the manufacturer of this window, all I know is that it is old. I need both left and right hand operators. Can you tell from this picture what I need? Let me know what else I can look for or take pictures of to help identify the part needed. Thank you, Bryan

i think this is the part that i need but just wanted to make sure before i placed an order... https://www.swisco.com/EntryGard-Operator-9-1_2-inch-Arm-Left-Handed/pd/Casement-Window-Replacement-Operators/39-031 thanks matt

This window was found in the property we bought -- but the crank and cover are missing. I've included some close-ups of the mechanism that may help in identifying the model. The crank from a new window we bought works on this one -- it's a smaller diameter than the crank on another window (just sen ... (cont.)

just need to replace some handles and the spindles

Some cheap model all vinyl casement window parts!I have some crank hardware but the track on new ones are a plastic bearing roller!Is there a track/guide to fit this and also the pin side that the short arm connects to on pivot side of window? What about this crank mechanism?Also truth!I need this a ... (cont.)

Good morning,I would like to replace the current cranks shown in pictures with new cranks. The current brand is Loewen and were electric windows. We are going away from the electric windows and going back to hand cranking them. The only problem is that these windows are 12 feet off the ground so I n ... (cont.)

Need the slip in locking handle.

Swisco Team, I have 8 casement windows (6 right hinged, 2 left hinged) that have failing mechanisms; the crank shaft appears to be breaking or coming out. I have a contractor that is going to do the removal/installation work (I would probably break the windows trying myself), but I need to order the ... (cont.)

I need this part

Can you please tell me the correct replacement part for this window. I'm not sure how you measure the arm. I'd like a left and a right side part. Long arm says Entry Guard Truth, number 30472RH on the back. Short arm says number 30842R and 20810 on different parts of the front Base has a 6 and 4047 ... (cont.)

Hello, I need to replace the operator for our kitchen window. Some of the gears no longer move when we move the crank. On the crank it says, "Entry Gard Truth" and on the back side 40753. On the smaller part with the hinge it says 31538A. I have attached pictures of the operator. Could you please he ... (cont.)

The crank started wiggling then came out. I tried to screw it back in, but it could not catch on the inside. Do I need to replace everything or just the handle? Also, I am not very handy. Will replacing it be a task?

Here are a few more photos with info, Entry Guard Truth 30842R 20810 Need part for Vetter window

Vetter window. Need parts

The number stamped on the operator is #R30842 and L30841. i need 2 lefts and 1 right. Thanks Doug

Hey Mr. Mike, here is a photo of the operator

I'm trying to locate a Marvin handle that attaches to a Truth operator with code 20810a as in the picture. Could you please help ? Thanks.

On the final arm (silver in color) is stamped 20544. On the underside of the bent or angled arm that connects with the final arm is stamped 30636. On the long brass-colored arm that goes to the bottom of the window is stamped 30470LH. On the brass-colored half circle canopy that is at the base of th ... (cont.)

I need to identify and replace the crank covers on several windows right hand and left. It looks to be a truth entry guard.

entry gard truth20810A right 9inch