Viewing all customer Discussions for:

39-036 Truth Hardware Entrygard Dyad Window Operator

I'm looking for a replacement crank operator for a casement window manufactured by Caradco. The window has a single 12

I have a 1987 Marvin casement window and I need a new operator and some new weather stripping as shown in the attached pictures. Thanks Bill

Looking for item listed above

I have wooden casement style windows with what I think are called Operator Dual Arm controls. The handle says NORCO. In researching the web it seems they may be Jeld Wen windows. Do you sell replacement parts? I didn

The number on the control arm for this Bilt Best is 3084IL. Do you have a replacement? Thanks

The controller seems to be about 4" wide and has a stamped number - 306-36. Another part says "Truth" but this name is not on the part of the controller I can see. Do you carry a replacement part? Thanks! Nelson

I need to replace this window crank and was looking for your help in replacing this one. Can you please get back to me if you have this or referal to someone does? I appreciate you help

I have three windows that need new replacement cranks. I have attached photos of the existing units. The

I am trying to match up some crank assemblies for Caradco windows. On the castings they say Truth and on worm wheels R30842 and L30842. I am physcally in Wisconsin and the windows are in Kentucky. I believe the nominal width of each side of double casement window is 16" and I have others that I ... (cont.)

I have those number at my window closer 30637, 20810, 40372 . what is the mach number for your parts . i need 3 sets. Are those number belong to entry gard closer. thank you

The spiral mechanism that connects with the gears that move and open the window is broken off on the end and will not close the window. It says 'Truth Entry Guard' but the piece that connects to the gear is angled and the replacement part #39-036 is not angled. The measurements are also different. ... (cont.)

Hello, I just recieved an order that I placed with you folks for replacement window operators for Caradaco casement windows. When I look at existing screw locations and new they are recessed back so far that you cannot get to them with any tool I know of. Can you let me know how to replace these w ... (cont.)

I have a casement window that I am trying to find a replacement for the crank system. Listed below are pictures that might help you locate the type of system that I have. Thank you, Gary

I have some very old looking window casements and some of the operators have either stripped the gearing or have come out of the framework. I have some numbers off the old mechanism but not sure which unit to purchase if they will fit the existing locations? I have one operator out and it show a TRU ... (cont.)

Hello, I'm looking to purchase 2 window cranks. They say ( Thermal Gard ) on the handles. On the cranking gear box it has the name ( Truth ) on it. One has the # 30637 and the other has the # 30636 stamped into them. They are located at the bottom of the window in the middle of it. The hinges on the ... (cont.)

I need a truth operator detach clip. The one I have on the new casement operator is deformed and I can't get it to lock on the new stud plate I picked up from you awhile back. I tried using the old plate with the new operator, but the plate was bent..bad idea. Now with the new plate the clip is lo ... (cont.)

I have a Casement bay window where both the left and right operators are broken. I can not identify the brand of the window. Please let me know if you have any information from the attached images. Thank you!

Hello, Trying to find correct replacement parts for Caradco casement windows. There are two different style operating mechanisms. The smaller bay window, has Truth hardware with # 30637 stamped on longest part,about 4 1/2". One of the other windows has Entry Guard Truth #20755 stamped on it ... (cont.)

Hi, I have several Marvin Windows requiring replacement of the operators. The original hardware is made by Truth Co, and the hardware P/N 39-035 and 39-036 on youy website looks very similar to my present hardware. However I notice that one of the two lever arms has a different shape than the on ... (cont.)

I eyed up the old part and incorrectly ordered item number 39-155. Now that I took out the old part I see the new one won't fit. I can now see numbers stamped on the old crank: on the gear is 30844R and on the lever is 30842R and the word "TRUTH" is also stamped on the assembly. Could I return the u ... (cont.)