Viewing all customer Discussions for:

39-070 Lever Lock Awning Window Operator, 23-1/4"

I have seven broken Atrium window cranks: 4 right handled and 3 left handled. Please see the attached picture "AtriumWindowCrank.jpg". The number on the crank is 40425 and the operating arm is 9.4" long. Also, I have to replace the handle and/or mechanism for another Atrium Window shown in the atta ... (cont.)

Can you recommend a replacement for the locking/operator lever on Caradco awning window? Marked with USA Truth on underside.

It's approximately 26 in wide when closed. Crank came out. Do you know which operators would attach to the window like the current operator and not to the bottom of the window?

Hello, I am looking for this part. you have similar parts but the lever on this seems to be closer to the window. do you know if the other levers you have shown on your site will work? Thanks much

Can you identify the replacement part and manufacturer from the attached picture? Any help is much appreciated.

What part do I need for this? Can I get just a handle or replace the whole assembly?

I'm totally confused as to which operator I need. I am enclosing a picture with the measurements written on it. Can you help me? I'm sure it's the 10.11 but it looks like them are different dimensions. I need both left and right sides. I appreciate your help. Harley

I need several replacement handles for these windows

I have casement windows with internal mounted screens without cranks, which makes it very inconvenient to open the windows. These windows are original to the house, which was built in 1952. The hinges have engraved on them "R. Andersen Corporation Bayport MN". Ideally, I would need 30 hand cranks to ... (cont.)

Good afternoon I am doing a remodelation on a hotel in dowtown Miami, I have 40 ea. Awning Windows 72"H x 36" W, the hardware they have is obsolete, I can not find it anywhere. I would like to confirm with you if your product Lever Lock Awning Window Operator, 23-1/4" could be use on a window of the ... (cont.)

Pozzi Want to replace this. The whole mechanism. But we want white now.

We have a window in our bathroom and the handle broke off of it. The problem is that we cannot figure out the manufacturer of the window. They are from 1991 and most likely out of business. Here is a photo of the part. Any ideas? Kara

Please see attached photos. I have a 26-year vintage wood Sun Bay window by Marvin. The handle broke off recently. I was told by manufacturer's rep that they used Truth Hardware's awning operator but they don't have the parts I need. The Dual Pull Lever Operator 10.11 is the closest I can find ... (cont.)

Hi, I am looking to replace an old Truth operator. The current operator tip to tip measures 22" closed. The old one was missing a handle so we fabricated one to make. It is on an Anderson awning Window. As you can see by a picture of the side view I have ample space to replace it with the 39-070. T ... (cont.)

the handle on this latch broke off and I am trying to find a replacement. The only marking on the hardware say TRUTH and the numbers 30767. Any help in identifying the part is appreciated. THanks, Bob

Hello, I have five existing lever lock awning operators in my home that are basically identical to 39-070. I'm not sure of the existing brand and I'm not sure of the age (they are at least 20 years old). Visually, the existing operators look to be in OK shape, but they do a very poor job of sea ... (cont.)

This is a photo of a Truth 10.11 lever operator. The sash clearance is 3/8". There appear to be other variations of the 10.11 floating around that have different amounts of sash clearance. The Swisco 39-070 appears identical to this 10.11. My question is whether we can confirm that sash cleara ... (cont.)

Do you have this part?

Any chance of getting replacement for these??

looking for a replacement for a truth #30092 casement window operator the window is 30" wide x 18" tall similar to the attached picture