Viewing all customer Discussions for:

Door & Window

Hello and thank you for your help. This is a very old sliding glass door wheel in Canada. It is a very simple aluminum frame holding a single wheel. It is not square. I believe it is called a parallelogram with one adjustment screw at the top. There is a slot below the top rail to hold a nut that en ... (cont.)

10mm with overlap. Also spring-loaded pin to hold in place. Total dimensions for 1 window: 18 1/4" x 55 1/4". 2 windows needed.

Windows do not have any manufacturer markings. However I did find a matching part on your site. Top sash guide, fiberlux 18-073. I am missing multiples of this trapezoidal bump out that forces the window to the side when fully closed. If I can find a manufacturer I would also like to find the proper ... (cont.)

1 inch wide by 3/4. Many are broken and windows won't seal and I need to replace. Wondering exact name and type. Face guide for single hung windows I believe. Thanks

Hello!I need a pivot bar and a pivot shoe cam.The attached pictures are as follows:1. Picture of the window showing an intact pivot bar. I need another one of these.2. This is the shoe with the coil cover removed. You can see the broken cam.3. This is the removed shoe and cam (I removed the backing ... (cont.)

Hi, I am about to purchase the Keller Window Crank product 39-061. I believe I need the other parts that go along with it like the washer and screws for the internal leaver arm. Can you help me identify which parts I need?

I am searching for an 1 1/2 to 1 3/4 in roller replacement to raise up, for an original door purchased through Home Depot from Reliabuilt. Any help would be appreciated. Please let know if you have something that would work. Please also feel free to contact me with any questions. Thank you for all y ... (cont.)

I need a complete set for the slider i'v had since 2018...Purchased it at Home Depot. It looks like the 82-086, but my handle backing plate is 9 1/2 inches long not 8 1/2...I've added photo's of what I have. hanks!

Good afternoon,We are a retail company based in Portugal dedicated to commerce. Recently, a client approached us inquiring about a Window Limit Device from the brand Anderberg MFG. This device has a part on it with "G.15968" written on. After conducting some research, I came across your website and ... (cont.)

I believe this is a transformer. The picture has all of the information.

Please suggest the best replacement for this balance

P/N 2740 BSI

Attaches on window, mine is rusted on one side. Seems to be longer than what i can find

Help me figure out which order number

we have tilt in Alcoa 4092 windows from 1993 (I believe) -they look like the pic but they are dark brown. Is there a list of parts somewhere? i need the trim pieces as they are cracking off, and the pivot bar w the plastic glide under it. can you confirm which one it is please? thanks for any info y ... (cont.)

Good afternoon, I'm trying to find a replacement Door Knob/Latch as shown in the pictures. Do you have a replacement; we would rather keep it close to "original vintage". If not, next best thing. ps Stupidly, We bought a handle from HD however it doesn't cover the hole from this vintage handle.T ... (cont.)

Looking for replacement of a left and right operated case Ment window as shown in pictures

HOPING THIS CAN BE IDENTIFIED. IT IS A DOUBLE COIL BALANCER AND THE SIZE OF THE WINDOW IS APPROX. 32 X 32

I am looking for replacement latches for my Sun Casement windows. I have attached the photos but do not have one of it removed. Thank you

Spiral balance tilt window that has one balance that is halfway functioning. The other issue (picture) is that the "tabs" (or ??) that are typically on the sash are not there. Never had this issue before. Is that parts available as well???