Viewing all customer Discussions for:

Door & Window

It is a right window where a pin from a lower end of the window got disconnected from a plastic sliding hinge part. As you could see one picture shows the hinge that is disconnected from the plastic part and the other one shows intact hinge

looking for 100 of these screen corners

We have 30-yr old 6 sliding doors that have disintegrating brackets and need replacement. Please let me know if you have the part at your earliest. I tried to attach the pix but failed. I can email it to you.

Storm door hardware?

Balance Length: 32.5 Balance Stamp: Ultra-lift HO 32-64lbs Balance Color: gray Quantity: 30

I have awning windows installed in 2006. I think the brand is Vetter. (Pic 1) Two locks are broken, a left and right. (Pic 3,4) the broken part from left side is pic 4. Is there a replacement part available?

I would like to know if either 40-150 or 40-145 can be used for a storm door 1 3/4" thick

Have been trying for years to find window cranks. Window companies can not help me. I am hoping that you might be able to help me. There has to be some cranks somewhere. Thank you

Hello, My customer needs a lock for this setup and I am not sure what brand of door it is. Can you help me identify the right part? Thank you! Diana

HI- The photo with the handle on it was an attempt to use a nonmatching handle. Can you identify the entire mechanism? Thank you!

Can you please assist in identifying and providing replacement for this damaged weatherstripping?

I need 2 coil balances 2 window locks , left and right

I am for a seal that is to hold screens in place and pops into place at bottom of glider window to seal out dust & dirt. Windows are about 35 years old in church and this stuff is brittle from sun in ND. The bottom seals are like 25 1/2" for each window @ 10 windows & 2 small pieces for each scree ... (cont.)

Replacing glass some glass bead got cracked

Trying to identify which company this bottom operating arm off of a casement window has came from. I am guessing pella, but I am unsure

The distance between the jamb hole ( Balance hook goes in) and the take out clip is about 25 inches. How a 28-inch-long sash balance will fit? I wish, I could put a measuring tape against jamb hole and take out clip and take a picture and send it to you, but I cannot, there is not enough distance fo ... (cont.)

Can you help me please. I need weather striping and other parts. The guide / slide as you will see is completely rusted through. See pictures. Thank you.

Hello, I need assistance in ordering replacement window springs. I have a double hung window with these rolling type metal coils. Window size is 42" wide by 60" height.

Hello, I am looking for the following window balance, guides, and take out clips. Please advise if you have these items available. I will need two sets as I have two windows that are missing these parts. The sash is 9 pounds. The visible glass height is 12 3/4". 01-32011-4 (for the balance) 01 ... (cont.)

16 long & 1540 stamped on it. unknown window manufacturer I need two of them.