Viewing all customer Discussions for:

Door & Window

I need help replacing all theses parts in theses pictures

I am looking to repair these windows.There are total of 5 of them that need. This part

This part's screwed with the window glass frame (both sides) to hold the channel balance in place

I'm trying to determine what window balance replacement part to purchase. Markings found on the existing hardware are: 33 6 JT CMC 2 Thank you.

We have two sizes of hardware this one is slightly to thick in dimensions and won't line up with screw holes. Curious to get a slightly thinner one that fits.

I need to identify window to order window balancers The number on the bottom reads: 19771577.5.4 Thank you!

I cannot find what make of windows these are. I am hoping you will be able to tell what model they are by the hardware that needs replaced. This is a large picture window with a left and right crank out. They are both wore out and need replaced. You can see in the one picture that the sprocket porti ... (cont.)

I have an aluminum single pane sliding window with worn and cracked plastic concave rollers. The manufactures label is faded and unreadable except for the following markings: code 24-1, HP series. The closest part I can find dimensionally is 87-161, but it has a flat wheel.

Hello We need help tracking this window lock

The length is 30" It has square foot. Window size is 2/8 x 5/6 I need parts for 3 windows. If you don't have square, I would to replace with round.

We are looking to purchase a crank operator for an Andersen casement window. The crank is on the right and the window opening on the left. There is a number 39 on the arm of the bar. If you can provide the name of an installer in Chicago, we'd be grateful.

I was unable to find anything the visually matches my rollers in your inventory. Unfortunately the door and sill doesn't have a model or manufacturer labeling. Any assistance would be appreciated. Andrew

This is a vinyl Window glazing bead I need

Semco window co. Merrill wis. Truth hardware

window latch broken, window is Milgard please help locate part.

I need replacements for milgard window balances. Steel part is 27" depth is 10/16" and width is 9/16". Have attached pictures. I see a post on your site for someone else that had same model number, 26 5 GW CMC 4, but the recommended replacement didn't match the measurements on my balance. Any he ... (cont.)

Patent # US 7,040,671 B2

25-2 two windows 4 balance 25-4 five windows 10 balance

The part is from the stationary sash of a horizontal sliding window from OLDACH Windows that went bankrupt in 2009. The part is the jamb by the window lock. I included a section of the part. The part is 1.75 inches long. The flange that is damaged help hold the screen for the active sash. The damag ... (cont.)

Please help me. Let me know if you have something similar to this mechanism for closing the window. Material metal, color as in the photo.