Viewing all customer Discussions for:

Door & Window

I have a Caradco sliding door. I think I need new rollers. How do I remove the door to gain access. I adjusted the rollers to be retracted but I can not lift the door over the sill.

I have Integrity sliding patio doors with sliding screens. I need a new set of screen rollers

I am looking for replacement rollers for several sliders and windows at my condo association Hopefully you can match something up that will work. They are probably 10+ years oldThank you Dave

This is the part that mounts in the channel top right hand side of the slider portion. It is mounted with a screw and engages the balance when reinstalling the window. Without this the balance stays in the upper position

Do need the complete assemble to be replace or you sell the stub

Can you tell me what size I need for replacement weather stripping

Hi my handle slips when it turns

I need some MI parts. Please see pics. I need 2 of the plastic pieces that screw to the sash with 2 screws. They appear to hold the balance.

Sirs, I have found many of my hinge pins rusted on the bottom where the window is attached to the black sliding piece. I have mostly 10" tracks, but also 13" and 9-1/2"..I see stamped numbers 31858 and 30858. When looking them up, they seem to be the same? Are they?Also, does the crank location d ... (cont.)

I need LEFT and RIGHT window tilt latches for Sunrise Windows. 1800J windows from around 2007. Dimensions are 2-5/8"Lx3/4"Wx3/8"H. Pictures attached

Ellison window series 1500 shoe replacement, for left side and right side. Do you have this replacement part?

Hi Looking to find the correct window stripping with a 1/4 base and 1/4 height. My stripping pulled out of my window is about 32 inches long.

Hello, I have 2 windows with the same piece of plastic broken at the end of the balancers. And one of them also has a piece of broken metal that is sort of a T-shape. One of the plastic pieces has the number 20 on it and the other has the number 8 and they both have the same patent number on them. ... (cont.)

Need to replace balancers for Traco Impact windows Manufacturer: Traco Window Size: 33" W x 32"long Window Weight: 35# Balancer Length:30" Spring Length:16-1/4"

TRACO: SINGLE HUNG NOA #02-1120.03TEST # PA 201, PA 202 & PA 203"MIAMI - DADE COLNTY PRODUCT CONTROL APPROVED"Meels or exceeds AANIA/ NWWDA 101/I.S. 2-97 Specifications40.0268 (rev6-05)I need 4 of those.if you call please leave a message Raul

Hello, I'd like to swap out the larger crank in first photo for smaller crank in second. I need 3 more smaller cranks. Do you have these ?

17 1/2 length 17 4 stamp Milgard 2 for now but if it works out I will need probably 10-14 for larger windows through out my place.

My balance fits horizontally at the top of window channel.

Right one.

Hello,I need pivot pieces for Harvey Majesty windows, purchased in/around 2021/2022.Exterior composite, interior wood.The only marking on pivot piece is "5"Size 1 5/16" horizontal, 1 3/8" vertical.I can send photo if more helpful.Thank you, Eliot