Viewing all customer Discussions for:

Door & Window

It says Roto on the crank.

Hi, Im trying to fix my window that won't stay open and discovered the springs on both sides have snapped. The window weighs 12.8 lbs, and the only marking I see is "6AF" on the spring. What part do I need to replace it with? Thanks

the slide door was bought at Home Depot years ago. The broken plastic part goes inside the sliding track to hold the door on the bottom of it. Need a replacement of the plastic part or the whole bracket assembly.

Picture is of a good one.

Hi please see the picture. I need windows openers that will match the pictures. These windows are from around 1993 home in Tampa Florida. Will need about 10-15 of these. Please help!

Hi. It looks like this recoil is broken and unable to use my window. Do you have this part?I

Marshall XO Vinyl Slider Door - see photo of invoice. It seems like maybe a spring or such is broken because the catch does not automatically come back out as seen in the photo. I have to use something like a pencil or small screwdriver to draw it out.

29-05 HI5 CMC 50

Window channel balance info show in part and included in the photo 28-9 CN5 CMC 41 Thank you!

Tool says tip should be red, yellow or green. This looks none of those. Looks black? Which should I choose. Need a 29" one Also I need the part in the other pic that the channel travels in. s always... thank you!

Hello I have 3 windows that will no longer stay up. Do you know where I can get the springs (spiral tilt balance) for these windows?

Hi, I am lookig for the door handle and mechanism that latches/locks the door to the bottom. The handle goes up and down to open and lock. Could you please help?

I believe the brand is patio enclosures. I attempted to reuse the metal piece and just replace the wheel, however the narrow width of the whole piece (.5") meant that I couldn't use any of the replacement hardware to attach the new wheel or it would be too wide for the track. Sorry the piece is a li ... (cont.)

Both lower sash pivot bars are snapped off. Photos show the (broken) part installed. They are from a Wellington vinyl window, circa 2000 or so. I'll get another photo of the part removed if needed. Thx! John

Broken handle Part number?

I would like to replace my current sliding glass door handle with a key lock handle. Not sure of the maker of the door or what all the numbers mean. Can you help? Can send photos if needed.

Hello, I have an owner who needs a replacement handle for her window.

Unit has the # 30841L also US Pat 4.241,542 Spans approximately 16 inchs

Looking for replacement or suitable substitute

I have a house full of Lincoln windows that are 30 years old but still in great shape. The glass was replaced 10 years ago but now the controllers are going bad. I'm hoping you can identify them and might have a replacement for them. I will need to get 10 of each side ( 10 right and 10 left ). I thi ... (cont.)