Viewing all customer Discussions for:

Door & Window

To whom it may concern:I need four new channel balances for a twin double hung window. I measured the metal on my existing part which is stamped with the numbers 2030. The metal part measures 20 inches exactly. According to your website there is no 2030 weight option for a S385-20 which is the only ... (cont.)

Please advise which part I need to order to replace as it is strippe. The measurements are on picture. Thank you.

The weather stripping on my sliding door got damaged by my dogs. Is this something I can purchase from your website? See pictures. Thanks,Jeff

Please see attached and advise on the correct parts for replacement

I need a replacement for spring loaded slider in the top rail where the sliding screen mounts at the top of the door. The plastic piece where the screws secure the sliding door to the slider are cracked and can no longer hold the screw. Do you have a replacement?Pella tells me my door was manufact ... (cont.)

Hello I need to replace some window balances. The window information I have is 8026728/10 Unit: 35.5000 65.5000, G1: 31.5000 30.1250. I need to replace all the balances for 3 windows so six balance assemblies total.

Please help me identify. I need new window balances and shoes. Stamped on the balance is: 26AA BSI AX It's 1/2" wide.

I'm would like to purchase a nine inch casement operator in aluminum. 39-044

Can you identify this latch may be from an Anderson windo

Afternoon the spline hole measure .334. I can not get to the spline for an accurate measurement. P/N is listed on handle. Bronze color Thanks Mark

Just need these tk be identified so I can order the replacements. They are 29 inches long and half inch wide

28" long. Cord broke or "unknotted", haven't been able to get the bottom piece out of the channel. What is the secret to getting a new assembly inserted into the channel - IF you can match what we need?

his is an older style sliding glass door. This appears to be a surface mount lock. I have taken all types of measurements. See pictures. The full length of the locking handle is 7". The measurement of the center hole to center hole is approximately or exactly 6 1/2" On the wood trim side, where the ... (cont.)

I have 3 different Channel Balances. All 3 have the same top and bottom plastic ends. The same metal hook. They are 1/2" X 5/8".#1 has 21C stamped on it. It is 22" long. The spring connects to the hole 20 5/8" from the bottom.#2 has 27C stamped on it. It is 28" long. The spring connects to the hole ... (cont.)

This is the latch (right side) for Patriot vinyl windows. I could not find exact one on your website. Would you please help?Thanks,Ken

These are the pieces we need help with getting replacement parts for we cannot use the door because when we open it, the bottom pieces rotted out and it comes off. Is the door swinging hit you in the face and what the hinge is on the bottom right?

Hi I have what I believe is a circa 1990's Mastercraft patio door that I'd like to find weather stripping for on the side of door that slides. The dimensions appear to be 1/4" by 1/4". The only one I can find that comes close is 58-127. Can this work or is there something closer that I'm not finding ... (cont.)

I have a crank out window. The top of the crank out bracket ?) broke and now can't open and close window with out it falling out. Wondering if you can identify the circled parts needed? Info on window is Eagle Maximized Plus IGCC CBA IGMAC CIG-3 1-04 Thanks! Shaun

It looks like I'd have to drill the rivets out to remove the roller assembly, but do you have a replacement part for this?

Hello, Our caradco door I believe threshold is failing. I took the door off and noticed the threshold has failed and while sliding the door rollers gets stuck due to the track missing. Is there a replacement type of threshold I could get like part number or just any one to replace it with. The curr ... (cont.)