Viewing all customer Discussions for:

Door & Window

I am looking for the following part: Manhattan Destiny Round Door Bottom Guide Part 48399 Here is a picture of the part. Thank you again, David

I have 6 windows that require repairs. The glass (less the 2" pvc), is 28" high and weighs 36 lbs. I am looking for 12 of each - 12 balance springs (existing is 26 9 BSI and metal to metal is 27") - 12shoe assemblies (1-1/4") - 12 window latches c/w white screws (screw holes are 2-1/16" X 11/16") ... (cont.)

I can't find any identifying marks on the windows. These are single hung/ wood windows that might be replacement windows. The balance is a simple spring with a block on the bottom. The sash has a round spring loaded "clip" that engages just above the block on the spring. The clip tip is broken of ... (cont.)

Good day! I am looking for a 30" channel with matching sash (take out) clips. The channel top and bottom (shoe) must be winged. My current channel isn't stamped, so I need to weigh the sash to determine strength. Thanks for your help!

Hi -I have Lawson windows of various sizes. The current need is the channel balance pictured - 35" with a heavy 45 pound sash.Thanks.Ken

My storm door has 4 strips that hold the moveable window in place and have slots that allow you to adjust the opening up and down. A couple of the strips are pretty cracked and need to be replaced. They are still technically functional, but don't look very nice. I would like to replace all 4 stri ... (cont.)

Request help for replacement crank assembly and locking mechanism for a casement window (Window #2). Photos attached. Very pleased with your help a few weeks ago with Window #1.

Looking to identify and order these window balances

Channel Balance

I'm not sure of the manufacturer or brand. The operator "crank" I only need the the threaded turn knob. Any help you could give me would be greatly appreciated !

Hello We are in need of the replacement double arm crank mechanism on this window as well as the track. Thank you for your help.

how wide is the "hook" portion of this keeper, SWISCO Product 89-040 : Miller Sliding Glass Door Keeper thank you

Can't find this particular model on your site. From research I've done, I believe it's a Truth Hardware Maxim

can you identify which replacement balance I need?

I need this part but I need right and left

I thought I could replace the lock mechanism but can't find a serial number. So may have to replace the patio door locking handles. See picture

Hi,Could you please help me to find and buy sliding Patio door handle set replacement as of the attached Photos.Best regardsMagdi

We have a Pella storm door but are having issues finding this lock. Could you please help identify a lock that we can replace this with? Thank you

Window Manufacturer is unknown: Attached Photos Part 1268 is Right Side Part 1269 is Left Side Overall Length is 2.50" Spacing between Holes is 1/2" First Hole starts 1/2" from the end The piece has a tee-slotted shape where it is screwed into the sash. The bar that fits into the shoe is slightly ... (cont.)

I have a right and left swing and the crank on right side is stripped and will not pull the window in. I would like to replace cranks on both to fix the stripping issue.