Viewing all customer Discussions for:

Door & Window

Andersen casement window installed in 2001. Upper hinge was forced and popped apart. Want replacement upper hinge that matches so I can just unscrew old one and screw in new one.

Upper plastic rollers shot on screen door from the 60's how do I remove and replace?

Hi, one of my casement windows is missing it's crank handle. I took a pic of manufacturer label. Is it possible to just order handle? Thanks

Condensation occurs. Assume seal is too thin. The round air vents are open. I have double hung and casement style windows.

Hi, I was wondering if you would be able to help me with these parts I am looking for 1 left tilt sash. 2 right tilt sash latches and 6 balances. They measure about 27in length. Thank you in advance

Looking for security deadbolt lock replacement. It looks similiar with Swisco Multi-Point Mortise Lock and Keeper, 9-7/8" Product Code: 82-239. Please verify if you can

Need 2 of these for a vinyl window. 11 lb window. 2 balances Thank you

Awning Window hinges Right and left Hand, Manufacturer unknown. The hinge picture is of the righthand hinge as seen from the inside. The frame lock and crank image is to provide manufacturer context.

I'm looking for coil balancers for Rosati DH H-R65-44x62 window It looks like somebody has tried to do something with these before?

Hello,Would you, please recommend a replacement for Pella, fiberglass, sliding window locks? See attached photographs.Thank youMichael

stamped 2990 38, 30" long, 5/8" wide. End pieces appear identical to what was shown in your video "How to Identify Replacement Channel Balances"

This is pictures I have of a Truth Mechanical crank wooden window opener. The old one is worn out and I am trying to find a replacement.

This window is an Alliance window installed circa 2004. Original contractor has shut his doors so I do not have specific information. There are no tags on the window to identify series, model or serial numbers. You have a few pivot brackets that appear similar, but the dimensions are off. If you ... (cont.)

I have Hayfield 701 vinyl casement windows with a May 2001 manufacturing date. I broke one of the latch locks (sequential in white) this is a two sash window. Right side latch broke. Left side of sash swings out.

I ordered the S161-07 which is I think the correct part, but the hold down is broke also and I don't see anything on your site that looks like mine. Im sending you a photo if you have the whole thing I would take that. Please let me know if you have something that might work

I need the part that us rusted out. It mounts to the lower section of the casement and is attached to the crank.

Hello, builder never installed keeper for door. It is now up to me, I tried to contact Wausau supply that is on the door sticker but no luck since I'm not a vendor. I do believe it is a waudena door. Could you help me locate the correct keeper?

I am looking to identify this window crank assembly for an awning window. thanks

I have a Simonton Inovo 2-Lite Sliding Patio Door for which I need to purchase ONE roller. I do not have a model number since I purchased the house from someone else and the sticker on the door was removed. Please help. I do not know what else to do. Simonton WAS NOT helpful at all. ... (cont.)