Viewing all customer Discussions for:

Door & Window

Please see the 3 photos attached that come from a Milgard Window. The markings (printed not etched) show 29 3 AQ CMC 4. Those markings are also shown in the photos. Measured length is 30 inches.

I have SGD R20 96x96, the locking lever is broken and difficult to lock. Can you please help me locate a replacement handle? The whole assembly. I have enclosed photos if that helps.Chris

I have a 17 inch Channel and my sash weights 6 lbs. The identifying marks are non existent. Can you help me?

All min are the same except the bottom letters. 26 4 BSI PA 26 4 BSI ON 26 4 BSI RF 26 4 BSI OL Please advise of the correct to order for my windows.

Looks like the rope has frayed and will need to be replaced.The window latch itself says "Mercer" and the only other markings say "18-5 FES CMC 75" channel is 20"

Trying to repair sliding door

I have kitchen window operator and need replacement for left and tight side. Which part will work? Do I need additional part?

Window is an Andersen Narroline, double hung 39W x 34H. Circa 1994. Need p/n of replacement sash balance units.

I need an entire crank mechanism for crank out window please see attached photos.

I need both the left and right Coil spring and parts replacements. Number on spring is 732. Both springs broke. Additionally, the shoes are cracked.

I need to replace the internal mechanism but I do not no what the manufacture is for this door. I purchased the door years ago at home depote

Hi, looking for that 3630, 1/2" balancer, same ends as my last order (last week).thank you,Gary

Can you help me identify the parts on these older double hung vinyl replacement windows? Please review the attached pictures the spiral balance has a red tip and the metal tube section is 22 inches long. They will need to be replaced as well. I don't yet have a full quantity of windows, but it' ... (cont.)

Looking for this window lock. I need 2 of them, see attached picture. Approx 8 years old

Hello, I am experiencing an issue where two windows in my home are unable to support their weight, resulting in them not staying open. Despite my efforts to locate an exact match, I have been unsuccessful. Could you kindly assist me with finding a solution? Thank you

Hello need part number for window only was able to get stickers located on window balancers need replaced.

My house was built in 1999 that has MW Twinseal Vinyl Double Hung Windows. MW Item#56546. The window balances are broke in one window. The picture in the window shows a number 5900SB. What is the part replacement that I need to replace both balances? Thank you, Dawn

Hello, I need to replace some Milgard window balances stamped 25 4 BSI TB. I would like 4 balances total.

Want to cover this hole in my jalousie window. The hole is on the left. The window crank is on the right . What is this part called and how do I get more?

This for a 26" Marvin Casement Window. I need two (2) left hand and two (2) right hand operator arms. Please provide correct part numbers. Thanks