Viewing all customer Discussions for:

Door & Window

Clip is 1 5/8" x .5" Plastic screw is 7/8" long

I have Caradco 716 windows but I'm looking for the pegs that you pull to get the screens into the slots. They have a spring like pull to them.

Hi there, I am looking to replace the balances on several windows and just want to make sure that I order the right parts. Please advise. Thanks Gabe

30B printed on balancer frame Note: this a NVR 2452 BLDG PRODUCTS THURMONT 6/6 GRILL Single Hung window

I ordered the operator that was said to have been the replacement for my original ut it does not work. The window does not close completely. Is there another operator that will work?

Need a new opener unit. Internal mechanical parts seem all wallrd out. 16 inch arm Anderson opener. I'll also need any required hardware to replace. Thanks!

Hello, I'm looking for glass patio door rollers with, "DEL MAR ENG, LONG BEACH, CAL, PAT PEND. script mark on the body. I included the dimensions in attached pictures. Please let me know if you have any questions Paul

On one it says 26 4 AW CMC 7 ON THE OTHER 23 3 DV CMC 7

I recently ordered part numbers 39-188 & 39-187 wanting to replace both crank handles in my daughters bedroom. Parts described have a total arm length of 5 inches. They are proper for a couple of my windows but the one needing to be replaced has a total arm length of approx 4-3/8" with the 5 inch ... (cont.)

Hi, I'm looking for this part for my patio sliding door. It's an older door it might be a Harvey door because all our windows are Harvey and the color and style seem to be the same. Thanks Leo

i have a 32" balance that has "86 32 9 KA5 CMC 2" on it. spring is missing so cannot weigh on scale what model weight do i order? thanks

Hello, This is a handle we are looking for, the insert is deep about one in in length and the grooves start about halfway in. it is not a hex insert it is the spindle-like one with grooves.

My casement replacement windows are about 25yrs old. I have to replace the operators on 2 windows (each window has a Left and a Right sash, so a total of 4 bad operators). The operator mechanism that mounts on the interior of the window frames are cracked/broken where the handle sets into the operat ... (cont.)

Hello, I am trying to replace 1960's era sliding glass door rollers. The only writing I can see on the unit is on the wheels and it says Syracuse, NY. Any help identifying replacement units would be greatly appreciated. Thanks Eric

I recently ordered a pivot shoe and pivot bar. The shoe works perfect, in fact I need another for a different window, but the pivot bar didn't work. Picture on floor is of the good bar; one on window is the new one that doesn't work. The holes just don't align to a good spot for how long it needs to ... (cont.)

I ordered 8 replacement screen corners They are 3/8" and are a little too small for my screen. Please note the photo. The white one on the left is yours. The cream one on the right is mine. Please note the extended edge on mine. Do you have this part?

Door handle says Andersen no other markings but looking for replacement screen inserts

Needing Tension for YKK Windows - Has Number 9 on it - Please let me know if you guys have the tensions needed

Hello! Looking to replace the lock and keeper on sliding door.

Appears to be a 81-009 Miller Sliding Glass Door roller?? Original as measured is 11/16" w X 1 1/2" h wheel diameter 1 1/2