Viewing all customer Discussions for:

Door & Window

See attached photo: 1. Need to replace two (2) tandem rollers in our sliding glass door. 2. Need expedited delivery

There are two plastic inserts in my single hung window where one insert is broken I need to replace. One picture show the clip in place in the sash. Another picture show the clip missing. And a third picture is of the insert I need.

Approx size is 2 5/8 by5/8

Hi - Trying to locate this plastic retainer clip for a NAMI window/screen. The clip slides into a channel which then retains the screen. Poor design as the clips break. As a result, need to locate these but unable to do so. Home Depot states Swisco would know. Please advise. Thanks for your ... (cont.)

I need some shoes for this window. I have not had any luck trying to locate them. There is no brand marking on the window. My customer would like to be able to use the window. Thanks

I have 7 casement windows that are around 25 years old and the plastic weather stripping is breaking in nearly all of them. Attached is an end picture of the weather stripping with dimensions added. Do you have something I can buy that will fit where these did? George

Good morning, Would you have this guide for my kitchen drawer? The guide is 21 long The size of the roller is 1/2 inch

Handle /lock broken.....Installed 2005

to be exact, the channel plastic housing dimensions are 1 1/2" X 3/4". the raised plastic housing dimensions are 1" X 5/8". the roller is 1/2" diameter X 7/32" wide. Please advise. Thank you.

Under the cover of the operator are two codes - B61529 &. B61530 At the end of swing arm it attaches to a track with a pin, and then that track has rollers in it. There are numbers on the hinge, part of the window plate and these are. 0618707. & 1361348.

I am looking for locks to replace some broken window locks. Do you have any that would work?

Hi, will your 33" Series 380 Channel Balance S380-33 replace my current balance? see the photos attached. Thank you

I would like to double check if 36-048 is the right parts for the repairs? I can not find the weather strips for this window. The slot is 3/16 width. Thanks. Dan

I have a broken crank -number OP05-1509. The hexagon piece broke off in the case so the window cannot shut properly and leaves a gap. The window was installed by a company named QualiTex in 2006 (San Jose or Canoga Park) No longer licensed. Receipt says 'Furnish and install new custom-made vinyl rep ... (cont.)

looking for replacement screens for acorn windows.size is 22" w x 57 1/2" H any ideas?

I need replacement parts for jeld wen window the window numbers I believe are g402-00993 6038. This is a discontinued item from jeld wen.

Hi, I am looking for a window lever replacement, I was thinking to replace the entire piece bc I tried adding a new handle and then gluing it in and it didn't work so then we tried cutting It off. The first photo shows the one that needs to be fixed. I can't crank the window open/closed right now. ... (cont.)

Looking for replacement access panel for window screens.looks like I need a left and right version, probably 20 of each

Can you identify this pivot shoe and do you have a replacement? The house is over twenty years old and there are several of these that have broken. Previous owners did not attempt to repair/replace them.

Hello, We are currently looking for balances with this profile. Please advise if there is 20-4 balances available in stock. Thank you!