Viewing all customer Discussions for:

Door & Window

Door thickness is 1". Existing hardware is 1" x 7.5".

Hi. I've got a casement window that I can no longer get to close with the crank handle. It opens fine. I've taken the cover off and it appears the part that's circled no long stays set when turning to close the window. The only markings I see on the operator at "Truth" and then the numbers "31" o ... (cont.)

Hi...I'm hoping to avoid replacing a lot of windows due to push out casement hardware that will not pull the glass frame tight to the fixed window frame. Also some of the handles have broken off and need replacing as well. If I can replace or fix the hardware then I will put the energy into repai ... (cont.)

Have old windows with old Jalousie windows and parts. Simply looking for additional what I call "Screw hole cover plates". Do you sell these? I need 5 inch plates. I cannot seem to locate in our hardware stores, or on line. Thanks!

Looking for crank cover and handle for Sierra Pacific Casement Windows. Require left and Right. Do you carry these? Photos included.

Not sure the exact terms but this casement window opens outward and is attached on the right with top and bottom hardware that have a piece that stops it from opening too far and keeps the corner in the track as it opens too. This piece has broken on the bottom. I think we should try to get new ones ... (cont.)

I bought the 39-016 operator. It's a pretty close, but not a match to my original. What should I Do?

Do you have the terratone ???color in 39-301. The picture looks darker than the color we have which I believe is terratone? Thank you for your help. Bill

I don't have a number for that part but I put in my cart the one I think I need

Hi. I have four old commercial 4'x5' metal framed windows that need new balances. Based on everything that I could gleam from your website, I am guessing that I might be able to retrofit the 29" series 400 version. The current balances do not have a color tip. The steel tubes are 3/8" in diameter. S ... (cont.)

Hi I'm looking for help identifying the correct part. My bottom attachment looks slightly different than ones pictured on the site. Thanks,

Stamped 2545

Pivot shoe

Also if somebody can post the video for how to change SilverLine Casement Window handle, I would appreciate. Handle is not broken but doesn't go up and down.

Good afternoon I have a retractable screen door where I need to order some spline for. It's flat spline, 13/32 wide and 3/32 thick.The 55-109 looks to be what I need, but want to make sure.

Looking for replacement channel balance for weather shield windows.

House built in the late 60's and sure if these are original. Hinge label: "Made in W.Germany 652.220.50.00". Part of hinge that does not screw into the cabinet door has part number 348.220.50/00. Any help would be greatly appreciated - I cannot find a replacement hinge!

Need part numbers for these window balances, please

Howdy,I need the replacement parts above for what I believe are Simonton Reflection 5500 windows (not sure though). I need (6) of the plastic lower parts (IMG_6168 through IMG-6171) that receive the cam, and two sets of the top release latches (left and right) as pictured in IMG_6172. Please cont ... (cont.)

Will this (82-086) work with the existing mortise lock in my Nami-201373? Does it come with keys? The lock lever broke on the inside of the door handle. Everything else is intact. Want to make sure I'm ordering the right part. Thanks!