Viewing all customer Discussions for:

Door & Window

Please advise which balancers I need to order. I need 4 total one for left side and right side of the window

I could not locate any names or numbers on the windows. The windows are aluminum clad wood and are in very good shape for being 15 years old. The seals are not in the best of condition.Also need tilt latches. Holes are 2 5/8" center to center. 13/16" wide. Nose is 1/2". Unit has 2 pieces. Outer piec ... (cont.)

I wasn't able tp locate the sash pivot part online. Perhaps you can help me.

I dont see this on your site. do you have this?

Please see attached picture of broken corner.

Hello, We purchased our house and it had this sliding door. The top bracket that holds the inactive leaf is missing. I don't know the brand of the sliding door and didn't see any info on it. I did see your Youtube ad, so I thought I'd give this a shot.

If my bottom sash is 26'' high, how long should my spiral balance be? We do not have the old ones?

I have 20 Marvin casement windows, circa 1999. They work beautifully but the crank handles stick out and get in the way of blinds. Would your truth folding handle work for my windows? And is the a bulk price? The casing is 5.5 x 1.5" at its largest dimensions. Let me know if you need other informati ... (cont.)

pat # 5737877 length of rod is 23 1/4

NAMI sticker code: S-082-1NAMI sticker Rating: H-R50NAMI sticker series: 1850 DHNAMI sticker MST: 3850We believe these are manufactured by Superseal Manufacturing which has been sold to Hurd, who sells this line under the Sierra Pacific Brand, 8000 to 8500 series.However the new line does not appear ... (cont.)

I sent photos for you to review. The metal measures about 32 5/8. So I am not sure which one. There is an imprint that says 32 9 PG. Please let me know the correct one to order and let me know how to return the incorrect one I ordered recently. Thanks.

Looking to get replacement balance rods for my Milgaurd windows 1989 vintage. Metal piece measure 27" long w/o the plastic guide ends that are riveted to it. Spring length is 12" long approximately 5/8" wide and 3/4" tall Thank you,Steven

Hello?.can you please tell me the correct balance to order according to this picture?.I provided My part says 26 4 AU CMC 4

Hopefully you can identify the parts needed with these photos.Thank you in advance,Gene

Looking for replacement window shows for my older CDI windows. Anything even close..

Hi, looking for replacement for 25" balancer channel, stamped 2440, with the attached photos. Thanks for your help, Charlie

I'm trying to repair an old sash window with a broken pulley but the balances on it aren't even the same. Not only are they different lengths, but the end pieces are different. It seems like a past owner replaced one. The thing is, both seem to be incorrect to me based on the size and weight of the ... (cont.)

Need replacement tilt latches. 30 yr old metal windows. Latch slides onto window from side, held by the slots on the window and one of two screws holding the top of the window together. Picts show the latch removed and in place.

TRYING TO GET THE CORRECT TILT LATCH FOR A ALLSIDE TILTING DOUBLE HUNG

Hello! I need one 38-090 and the correct hing and crank. Can you please tell me what hing and crank I should order? Thank you! Danette