Viewing all customer Discussions for:

Door & Window

HI Please help, what is the part # [see photo] that has a screw to secure the metal window frame to go with channel balancer S385-21 for stopping window move to top, The plastic is broken on one side and need a replacement. Also I need the 2nd part# for the square drive I believe it is #2. Thank ... (cont.)

need replacement for amcraft grand estates double hung window

Hello, is 36-028HD sold as a single hinge or in a package of two hinges?

D17 7#27 11 80 Need left and a right for my window

Hi, one of side of my Pella window, the pin broke and I need one to replace it. The working one is in the picture above the screw (broken one on bottom left), and that's what needs to be replaced. Thank you.

Hello, can we please get part # for attached screen corners?

The mounting hole in my door is 3 1/8 inches high, too small for the latch carried by Home Depot, do you have the part number for what I need? Thanks

Need to replace cranks for old windows. don't have any photos of before because the painter removed them before we had a chance! hoping you can help!

I am dealing with a broken sash keeper that is stuck in the frame. I need some suggestions on how to remove it and once I do, what replacement part might fit this? It's an old house and sadly, none of the windows or frames have any model numbers.

Looking for this channel balance, supposed to be a Pennco window. Stamped on the backside with a 27B. Any help ? Thanks, Jeff

Part #1230

Hello, I've attached photos of a part that has broken from my window. Please let me know the part # so I can purchase

I have 4 windows that have broken balance springs. Will need replacement parts. If you have any installation guides or videos that would be helpful. Replacing both sides so will need 8 total

Hey there, I'm kinda stumped here. I can most likely force some of these Top Sash Guides that you have into working. However, I'd prefer to have an exact match if such a fabled piece exists.

I need 4 21½inch duel arm crank operators, crank arm & handles. 45301 is on the bottom of crank operator, 0078 is printed on left arm assembly, 4007 printed on right arm assembly

I just ordered two of part 18-009. The screw heads are stripped but I was able to remove them. Do you have those screws available?

Hi! I need help ordering 3 window balances for my Phillips Windows model PHP-27 The length of the metal channel is 27 15/16" and the width is about 7/16". I have already have the T-shoes. The marking on the window channel is BSI TB 28C. The spring length is about 15" and the spring width is 3/8". ... (cont.)

o you guys have these parts shown in the photographs below? The specs/balance is 5/8 x 36 inches. The weight is 38.8 LBS 36" Series 770 Balance.

My numbers on the door casing: Prod# P6400332 Manuf # 152180801. PATIN # 7179639. TSCA 0818. Will parts 40-199 and 40-191 fit my door? It looks the same as what I have.

Hello, I found my coil to be broke apart this spring and I'm looking for a replacement. I'm a condo complex and I'm not the first owner of the property so I'm unsure which brand of windows they are. I came across this website and I'm looking to purchase a replacement coil, the rest of the assembly ... (cont.)