Viewing all customer Discussions for:

Door & Window

I need 4 of these pivot bars for a 1998 carefree window unit.

Length is 7-1/4 and the bar that pivots is 7-3/8. Markings from Truth on old one, 31858.

Which parts do I need to buy to replace this double coil? I am interested in replacing all the components.

I need 2

I have a MI window where part of the outer -upper sash has broken- one of the parts as shown in IMG 3249 with the second picture IMG 3258 showing the same part on a different window that is still working well. Do you sell these parts? Can it be replaced in the outer track?

I'm trying to find this part for my patio sliding door. it screws into the top of the door keeping it on the track. about 1" by 1"

Can you identify these parts? I replaced the channel balances in five windows and also found these broken parts.Thanks, Dennis

Hi I am hoping from the what this part looks like and the window tag, that you will able to tell me which part I should order. I want to replace the left and right cranks and parts. thank you Ann

Hello, I’ve got 4 casement windows that need to open from 17” to 20” to meet egress code. Do you have hardware that can be installed to allow the windows to open to 20” or greater? Here’s photos of the windows

The housing has identical dimensions to B713; 1-1/2" x 1" x 3/8" Roller dimensions are 1-1/8" OD, 1/4" width The differences are that B713 has 4 rivets and a post where it connects to the hook on the corner insert, this one has no post. The corner unit in the door has no hook; the roller assembly s ... (cont.)

I beleave its 3/8 i have a few windows 25 inch frame. is there a replacement kit? or parts to make one. Thanks Steven

I need help identifying the correct part number to replace this whole controller and scissor arms including the clips on the end as one is broken

Need replacement mortise lock These #'s are on the inside of the door handle. 5125703 D340.398

I have a condo project to complete. My windows were impacted by a hurricane. Attached is a photo of the lengths I need. Thank you, Gordon

Is this latch receiver, the black part attached to the frame, available?

Attached you'll find the photos of the balancer with details. The last two show the "channel blocker" (a term that I made up). They are fixed at the top of the channel so the channel balancer can push against it to hold the weight of the window. One of such blocker is broken and missing. The othe ... (cont.)

this part attatches to the window and connects to the balancer hardware

32 5/8" Stamped 32 3 I don't know details of window or when made. Just need 2 balances.

Can you please take a look at attached photos and let me know which is the right one for me to order from your website. The numbers on the old one is : 32-3 CH5 CMC 50. The length from one side of the metal to the other side is 33 inches. thank you

Price and availability for 2