Viewing all customer Discussions for:

Door & Window

Had a recent hail storm and need to find the closest window bead to repair several windows. Trying to find the bead that will work.

26 1/8 " x 5/8" the metal part of channel There are no numbers or markings whatsoever. I need 4 total please

I need whole aluminum parts for my old windows.I have 8 windows which is 16 pieces.

Trying to identify window glazing. This is for original exterior windows for house built around 1990. I have included some photos. Looking at the Snap-In Glazing options listed this looks like it could be Capital Snap-In but I would appreciate someone with a bit more expertise. Several pieces of ... (cont.)

Looking to replace 1 1/4" metal roller assemblies (single roller at each end) for two (2) sliding glass patio doors (2 x 2 = 4 assemblies). Age unknown, probably from the 70's, perhaps even the 60's (when house was built.) To remove the rollers, you remove a screw from the side frame, tap the fra ... (cont.)

31 5/8 inch sash weighing 29.6 lbs Milgard non tilt sash possibly manufactured in 2006/7. Require 6 balances.

Need to replace a few balance's on some of my windows at my house. It says it's a 34 R in beige.

its a unknown bran of window see no label or tags on windows need to order replacements uploading photos when they were removed took them out before i seen you wanted photos installed and uninstalled.no name numbers or stamping seen

I have included the pictures of the current window balance spring and shoe. I need both the left and right side replacement springs for this window. The spring number is 6JK, so 6 pound springs? Attached is the window size. Thank you, Kevin

*

Hello, The problem appears to be the back plastic position adjuster. I didn't find any number on the truth mechanism, but did take a photo with the tape measure to help with sizing. I hope you can help! Thanks.

Need the part number for a slide in tension spring that is 3/8" wide and is made of stainless steel.

Hello, please help n ordering the items. Attached pictures.

looking for bottom hinge pins for double hung windows

Good day, I am looking for a replacement part coil balance springs for a GENTEK vinyl window. The window sash is approximately 16.5 pounds. The Coil Spring is stamped with "6" as identified in the attached photo. Thanks, Kevin

Faceplate is two and a half inches high by one and a quarter inches wide

Anderson casement window.. installed 1987 As you face it from indoors.. lever locks are on left.. pivoting from right.. please provide order information

I need to purchase two new rollers for a house in 1954. Glass sliding patio door rollers.

Hi, I'd like to get a replacement for my window balance. I think its size is 1/2" and 28" long and the marking shows "28 2." I don't know if it's an extended travel one or not. Please assist me in identifying the parts that I would need and the price of these parts and shipping cost. ~Dina ... (cont.)

What can I do to convert to an external keyed lockable door. Note, the current mechanism works fine, it's just not keyed. Thank you