Viewing all customer Discussions for:

Door & Window

Looking for something that will work similarly to this end

Hello: I have a semi-circular top portion that is the upper part of a screen with a rectangle on the bottom. I am looking for these adjustable corner pieces please. I know some neighbors have issues locating as well. Thank you Mike

Trying to find nylon sliders for horizontal windows. They are 20mm long 13mm wide and the part that goes into the window is 7mm. but I guess I can saw or sand some of the 20mm if need be. anything close?

need a left and a right no numbers on crank

Hello Swisco Here is the part I need please. If I measured correctly, here is what I got. 1 1/4 wide x 17/32 or 9/16 deep x just under 1 1/2 long from the arch at the top. Looks like it matches Product Code: 15-177 Please let me know to place the order. Thank you. JPG

I'd like to find a replacement part for a broken part of my screen door lock. I've attached photos for a better description of what I need. The screen door does not lock as the left side door mechanism broke. I don't know the brand or type of screen door as the previous owner installed it and the ... (cont.)

Hi I have a home with Pella casement windows build in May 1980. I have both hinges from your website the 9 5/8" and 10" both are one piece units. As you can see from my picture the hinge I have are two pieces. Do you have any two pieces units.Thanks for your help Bill

Length is 23" I have no manufacturer info and I need 2 of them

I believe the windows are Milgard. The metal channel measures 31 5/8".

I just purchased the crank mechanism shown in the last picture, and it was an exact match. I now realized the sliding mechanism that attaches to the crank and the window is rusted out and needs to be replaced as well. Not sure what this part is even called, but it entails a pin that goes through a s ... (cont.)

Hi there-- I have a sash balancer that I would need replacing. yes they are the same on each side and I do believe something broke off. I just took this close up pic if this would help? Thank you.

Please help me identify which block and tackle system to replace mine with and how to remove old and install new. Thanks.

I do not know the manufacturer of my windows, I am looking for a replacement of the plastic part shown in the picture. Can you identify the part?

they are finger tabs that release the sash on my porch windows-there is no brand names or numbers anywhere on the windows that I could find-1" long, 1/4" wide and 5/8 inch total height.Tabs are close to 5/16" long and there is about 1/8" between them. They squeeze together to fit into the sash. ... (cont.)

This is a picture of the parts that I removed after the pivot shoe lock broke from the assembly. Can you help me order the replacement parts? There is a numer 5 stamped on the coil spring.Thank you.D. Brown

Hopefully you can identify the Truth casement window cranks that we have. Both the right and left handles have broken. There may be more problems, but to avoid taking out all the wood to replace the gear mechanism, I thought I would start with replacing the handles--if available. If I need to buy ... (cont.)

Hello, Hello.I've attached the only P/N for the window assembly that i could find. The window dimensions are written in on the window frame photo. The house was built in 1999/2000 I believe, and it seems that numerous windows have at least one coil balance broken, but I don't see any pivot shoes bro ... (cont.)

i believe i am looking for this item but would like you to confirm please Product Code: 39-470ive attached the photos of the unit in my home both in the window and removed from the window - thank you!

This window crank needs to be replaced

Help Identifying Hardware.