Viewing all customer Discussions for:

Door & Window

Looking to identify this screen door roller. It has a internal spring pushing the wheel out as well

I’d like to place an order for the following window channel balances, all using the same shoe and clip configuration as in the photos: 28 5/8" (metal length) • Stamped: 28-5 • Quantity: 18 pcs 26 11/16" (metal length) • Stamped: 26-4 • Quantity: 4 pcs 26 ... (cont.)

Weathershield window balancer. Looks like ribbed, but not sure which model. Window is probably 20 yrs old. Characters on part(see picture): DB J03 and 33 TGX

Need a couple new balances for our windows. I want to verify I am ordering the correct part. I have attached some pictures.

Photos of fittings and stamping attached. 27" metal channel. 2630 stamp. Unknown manufacturer. Window and sash is 18 lbs. Will order two balances of this type.

Trying to find a replacement but not sure what I need ?

Looking for almond glazing bead for Ply Gem windows.

Crank handle system needed. Please see pictures attached

The left coil balance is damaged. The window is 3x3". How do I exchange the part? There is no cutout. on the picture I have it already unscrewed ( 2 screws).

Do you where I can get a hold of some or similar

Will not close.

Length 26 1/2 Stamp 26 4 8 balances needed

26" overall length, springs is ~13.5". It's a square channel and i need around 6 of these. One window both sides broke, others only only side. The third picture where the window locks in seem ok, just the channels where the ropes have broken. Do you have replacements for these? I am trying to f ... (cont.)

I'm replacing the window rollers on 3 windows, 6 dual rollers assemblies. The track with is - 7/16" with a single fastener. Do you have replacements for this.

I too have a balancer with the number 1160- 17. The rest of the numbers I cannot read. Can you match the right balancer with the size of the windows? I have one that's 40 in wide by 54 in tall and the other two are 40 in by 61. I didn't know if you could match with that those numbers. Thank you ... (cont.)

Rotator coil balancer window, American craftsman number seven on the old balancer

Beige window latch

This is from Jeld-wen on a vinyl single hung manufactured April 1992 50 pcs needed

Need to find a replacement the I will need is black this is the same window but in another room

I need four or these. They are 27" end to end. The metal section is 26".