Viewing all customer Discussions for:

Door & Window

I need some tilt corners as well as some spring loaded locks to repair my fla. Room windows.

What would I need to replace these? Thanks!

The pivotshoe we took pictures of with measurements is broken. It's missing a metal piece where the spiral balance attaches to the pivotshoe. The picture of the one installed should be good as it still has the metal part. Could not find any name, numbers or markings on the pivotshoe, these are Don Y ... (cont.)

Hello. I'm in need of both a left and a right. It doens't quite match with any of the items I've found on your site so far, so maybe the photos will help. I haven't found any brand marking on the window itself. And the only numbers on the latches are a "2" on the fixed part, and a "3" on the part th ... (cont.)

I'm searching for replacement balances for PGT double hung, hurricane proof, tilt in windows. I've attached pictures I took before I left. The windows were installed in 2006 and the manufacturer has not been able to provide any info. The window has 2 balances on each side and the plastic shoe that a ... (cont.)

I have Series 380, 35" with a 38# rating stamped on both broken balances. Caldwell. Need help identifying the sash guide part number, plus any parts I'm not seeing that I will need. Thx!

Hello. I have an alcan window that both tilt latches have broken. Can you help identify what part I need?

Looking to match this window balance with one you recommend. Looking to replace for 12 windows.

Good afternoon. I need to buy two of these to replace existing cranks that are not working. Thank you!I tried to match them on your site and bought two of your item # 39-315. The 2nd portion of the opening arm (part stamped 31850) is too long. Thanks in advance for your help!I tried your customer se ... (cont.)

30818 , older window sliding arm seems to be about 8 1/2 in

I need to replace the window cranks on several of the casement windows in my home. I hope the photos attached give you enough info. to know what I need to buy.

I need help identifying what part I need to fix this window. In pic's #1 and #5 I circled the part on the left that cracked and the part on the window that clipped into it. The cracked part slides across the track and this doesn't have the same installation as your video does. Can you offer any h ... (cont.)

1 window part broken

i watched your replacement video and that looks exactly like what my window needs. From what i can tell i need to order the series 140 balance system both right and left side. The channel is 1- 1/4 wide and the window weighs about 11 lbs at best. The spring failed and now i just use the window witho ... (cont.)

Some of the clips or shows have fallen off our window arms. Do you have this style available for replacement?

I'm trying to find and purchase the correct coil balances for my Simonton windows. The home was built in the early 2000's but I just purchased it a couple years ago. Does the attached phote provide enough info to help order the right parts?

Hi again! Looking to replace the metal wheel assembly on a Hurd sliding screen door. Also looking for a replacement handle if you have one. Many thanks for all your help!

Trying to find Casement Hinge for window made in the 90's

Hi, I'm looking for a replacment for this part. Do you have anything like this. There are 2 arms attached to the control part and a separate 3rd arm that goes from the window to the house. Everything works except the crank auger keeps coming out of the cylinder. I have reshaped the cylinder end ... (cont.)

Hello, I have a house built in 1969 with 10 sets of sliding glass doors. I need to create a comprehensive inventory of needs, but they will require replacement wheels, door gaskets, and some locks at a minimum. Can you help me identify the manufacturer? next steps? Thanks