Viewing all customer Discussions for:

Door & Window

Hi, could you please help me in finding this type of weather stripping,it's vinyl and 5/16ths wide and 83 inches tall and is installed on Kawneer doors

Appreciate any assistance with identifying the attach part.

bance r number on ours is 2112 BS 18ours is 22 in long but the clips dont have wings do you have anything like this

The balances have the following numbers stamped on their sides 2020Z (21 inch) or 2220Z (23 inch).They are both 1/2 inches wide and appear to have the 19-005 fitting on the top and the 15-004 fitting on the bottom. I need 12 of the 2020Z and 6 of the 2220Z. Do either the 385 series or the 800 series ... (cont.)

My window balance rod is stamped 2520 BSI as in the attached photo. I see that you have that part but in a number of different series. How do I know what series to order? Thanks.Nelson

I want to order this (if available) or whatever you would suggest as replacement.

I cannot find the end clip for this style of spiral tilt. The tube is 3/8" & the length is 28". It seems the clip is riveted & has a spring in it. Is there a replacement for this or do I need to pry out the clip to be reused?Thank you,Kentaro

Hello : These snap in. The windows are the original windows but the manufacturer has gone out of business. The windows are 18 years old. Thank you, John

I have 2 single hung non-tilting windows that do not have balances. One measures 13 1/2", the other 29 1/2", for half the height. They both measure 23" wide. They are aluminum, marked Viking, and do have the take out clips, but nothing else. Home was built in1985. Previously they were screw shut ... (cont.)

Only markings are an artistic S and C. When I looked on YouTube for repair videos, I noticed how many were posted by Swisco. The door I'm repairing opens from left to right.

I need to replace the channel balances in my window. I'm not sure which is the correct replacement part. The channel balance length is 14 3/4 inches. I'm attaching photos. Thank you for your assistance.Jackie B.

I just bought an older house and all windows have this kind of opener. None of them work. Do you have this or a replacement that could fit? Thank you

I would like to be able to have it keyed and lock it from the outside,please sell me the exterior handle keyed or I'm willing to purchase the hole handle no problems

door handle broke on the inside of the door. Wondering how I can order a replacement. Thank you.

I need to replace 2 sash balances that have the number B92 4/19 485. What is the part number I will need to order from Swisco? Thank you.

So I'm looking for a bit piece that I could run to a power drill so I can fit over that little metal piece to roll the window down and up. As my hillbilly powered windows. It is also a small piece.

Looking to replace this broken channel balance. It appears many of the channel balances in my home's windows are wearing out. This one is 30 inches in length and has the number "2930" stamped on it. The window weighs about 21.2 lbs. The balance stop and shoe are both 1 inch in width. ... (cont.)

Needs to be replaced. Handle turns, but window doesn't move.

5 1/4. Dont know exact type 1950s

Hi, I have a Cole Sewell replacement door with the registrant # 04089796042 66. I'm looking to replace the handle set. Can you help me? Thanks, Bill