Viewing all customer Discussions for:

Door & Window

Shoe measurements: Lenght: 2 1/4 inches Width: 1 1/4 inches Height: 9/16 inches Grove devuce lenth: 1 1/16 inches Grove device width: 1 inch Grove device raised appendage heigth: 1/4 inch Grove device raised appendage width: 1/4 inch

Hi, Have old windows in my house that requires new window balance. Size is 24" and has a number 2330M as per pictured. thanks, Lisa

Trying to order proper Block and tackle Balance for single hung tilt out window. Actual Balance dimension is 29" long, 9/16" wide, and 1/2" deep. Dimension has to be exact as it tucks partially into frame requiring the depth to be correct. I ordered others that were listed as 1/2" deep but were actu ... (cont.)

I need a replacement track for a Stanley Monarch sliding door. Length 72", Model 50519982 or 240823? The rollers are in good shape so I don't to replace them at this time. The number stamped in the roller is 4011.

I would like a price and availably if possible for a sliding glass patio door locking mechanism in the photos attached. The handle is good just the locking mechanism is broken and will no longer lock. I don't know if I need the little handle that you would lift up or down to activate the lock or unl ... (cont.)

I need new channel balances for my windows. One is stamped 32-9 AG5 CMC 54. 33" long and just over 1/2 inch wide and deep. The other I need is stamped 32 4 DO Caldwell. Also 33" wide and just over 1/2 inch wide and deep. I also need all associated plastic hardware. Also, I am missing one clip ... (cont.)

Locks to allow window to stay up and to lean down. The other part is to the bottom of the window to looks like it closes up the bottom so water won't leak in or air to the inside.

Dear Sir: Attached are photo showing the label on the window frame, and the latch itself. These windows must be around 30 years old, and the plastic latches are all broken. They are installed in a second lake home so the latches do not get used much. I saw 26-295 and 26-333 that might do the j ... (cont.)

Hello Would like to know the availability of a set of these balancers. The window is @30" wide by 40" height. Thank you

The rotating window crank gears are stripped. The hinges work fine after I added grease. Can I replace the crank or do I need the whole assembly? Can you identify the make/model?Here are the dimensions of the base of the crank in front of the window frame:- width (horizontal) is 5.5"- two screws (no ... (cont.)

I hope you can help. I have sliding windows in need of repair. The problem is the windows won't stay up; the balances don't stay put because the top plastic caps have deteriorated with age. Windows are single hung. No tilt feature. White metal frame. White vinyl inserts. Might be from 2001. Not ... (cont.)

The big arm says "Entry Gard Truth" on it. Small arm has #20810 on it. Measurements appear to match. I'm thinking this will work with Swisco Product code 39-032. Is that correct?

Hello I am trying to replace a sash balance for a replacement vinyl window. The old balance is missing. I pulled a balance from another window in the same house that is a different size. The window that I am trying to replace the balance 14 pounds, glass 13" The window that I pulled a balance from ... (cont.)

How do you attach the Coil-spring to the shoe Help

Need help locating new hardware for bedroom windows, attached are the cranks. I will need (2) left hand and (2) right hands.

We need some white vinyl glazing bead for Radco aluminum windows, this bead is obsolete as far as we can tell. We are checking to see if you might have some or know where we can get it. There is not much flair on either side and then a groove down the top/center of the bead.

Any idea of my replacement?

The pulley wheel (?) is cracked. Do not know if I need whole new channel guide or wheel parts. Window is non tilt.

2007 single hung, vinyl windows don't seem to have the balancers attached to the frame. They are coming out and the windows are not held properly in place. All the pieces seem to be in good shape, just not hooked up correctly. I can't figure out how to get them properly in place. Seems like ther ... (cont.)

Hello, I need help to determine what balance replacement parts I need to fix two Milgard windows. The stamp on one has 23.5 RL BSI on it and measures 23 5/8 in length. The stamp on the other has 21.5 RH BSI and measures 21 5/8 in length. I have attached pictures of the stamps and pictures of t ... (cont.)