Viewing all customer Discussions for:

Door & Window

Just making sure before I place my order. My rail is ¾? to 7/8? (see picture) from the side. Will the replacement rail 80-106 that you have, work?

3rd photo shows the window2nd and 1st photo show mechanism with the jangle we like to replace Comment: we need this whole mechanism (lock?) with the handle because treads got used up and there is no way to open or close the window.Thanks, Chris

I have some (13) aluminum storm windows that need replacement parts. The sash bolts are plastic and have the word BENADA on one side and the number 937 on the other. Looking in your catalog, item 91-090 seems to be a match. I also need Tilt Keys and Corner Keys which have legs that are close to ... (cont.)

Hello, This is for a non tilt window channel balance. The stamp is A2645. It weighs about 25.9 lbs, and is 27" long. Thanks

Sliding Glass Door Rollers

Window latch. Note the handle is snapped off on the one side. Would like to order 4 new replacements.

Do you have any availability for the latch on a MI Windows, 360 series slider? I need one and MI sent me to you.Thank you for your help!Bruce

My Prestige home built in Canada came with Kohler Windows. The bottom pieces that fit into the side metal springs, that slide the window up and down, have broken. The window no longer slide, but can be shoved, up and down and held open with a piece of wood. The window numbers are: KV 376 821046 ... (cont.)

The window sash weighs 12 lbs

Are springs different for different size windows? These installed in 1998

Pics of balance stamped 21 12

Our mountaintop inn has aluminum spiral balance windows. The shoes are breaking and we can't find their replacements. We have a few shoes that look very much like Swisco's 15-045 and 15-212. However, the 3/8" thickness of those shoes is just a little bit too thick. The windows are too stiff for our ... (cont.)

These vinyl windows have no name or sticker anywhere on them. I took a sash to a couple window stores locally and they also had no idea what brand they were. I do know that they were installed around 2007 or 2008. The plastic height is about 1 1/4 inches and it has a coil that goes in the jam abo ... (cont.)

I need an Anderson sash balance part number D43-7P27-377. Let me know if you have this part or it?s equivalent. Thanks.

Window parts needed

I'm looking for three window parts. The first two parts go to a crank window. I'm looking to replace the crank as well as the lock (since the lever is snapped off). The third part goes to a different window. It is a lock to a double hung window. The picture shows an intact version of the part. Sever ... (cont.)

Hi. I found the thumb lever on your site but can't find this plastic tilt latch itself. Here's a picture of what I need. The windows are 23 years old.

Is the operator in photo replaced by 39-15. Arms measure just over 5" & 3".

Good afternoon do you know what model handle this is?

I'm ordering several 30" series 385 channel balance, but I'm not sure what top sash balance to get, either the 5/8 or 1/2. The top sash I have doesn't match anything on your website. I enclosed some pics.