Viewing all customer Discussions for:

Door & Window

I need help ordering the right channel balance for my alenco windows, installed in 1998I need to order 6 channels (for 3 windows) See attached photos.(stamped 33D-S DK38) Thank YouBilly

Hi there,I am in need of two 27" window channel balances. They are 27" long and 1/2 inch wide. The numbers on the balance are 2640 and the letters BSI.I was instructed by a sales associate that the wheel is coming out of the bottom of the shoe and it would be a custom build.Please let me know how m ... (cont.)

I am trying to replace this piece as the teeth in the gear the crank attaches to have worn out. My problem is I cannot find one that has the link piece with a smooth rivet like in pic 4653. With a nut it pushes against the entire window system and doesn't work. I almost cracked the entire metal piec ... (cont.)

Hello, I have a 24" channel balance (yes, 24" not 23") for a Viking window marked 2320 EG that I'd like to replace. Took some photos but the Add Photos button isn't responding. Can you help pin down the replacement part I need?Thanks,Will

We are looking for replacement cranks on Kawneer aluminum window installed in 2003. The crank appears to be the same as the 39-139 with one exception. The fasteners attach from the back side and there are no visible holes in the face of the crank

I have a 795 with a hook at the top, instead of a screw. My concern with using the screws is determining what kind of screw to use and if using the screw plug and screw will in any way affect the window function. These are tilt single hung windows and I just want to make sure that all functionalit ... (cont.)

My balance support is a double, 2 coils. It all fell out as I took it out so I do not know how the two coils were attached to the pivot which was broken. Can you describe how the assembly looks, orientation of springs in balance support and connection to pivot. My coils appear to be T160 a 4 and a 6 ... (cont.)

Lawrence sliding door roller 3/4 diameter round roller complete assm.

This one measures 17 inches. I have a bunch of different lengths but the ends are all the same. I wanted to start with this one to make sure I'm going the right direction.Thanks,Jim T

Looking through your posts, I see that I need 82-008 to replace the PR300, but looking at the attached picture, there is also the "dummy" lock on the left. Do you have something I can use to replace this?

I am looking to replace these parts and not sure what to order?

Hi! I'm not able to find these glazing beads for my old aluminum Milgard sliding windows. The size of the panel where the glazing goes is 35.5 x 30 inches. The length of the longer glazing bead is 33.5 inches after being cut diagonally. Please advise. Thank you, Brar

Hi, I'm Looking for this crystal windows parts. Do you have?

I need to order two complete replacement valances for one single non tilt out window. I want to make sure I order the correct one.

Photo attached is a sweep lock for Capitol 7800 aluminum slider window installed in 2006. The measurement from hole to hole is 2-1/4". The measurement from the edge to the hole is 1/4" on the short side and 1/2" from the wide side. Any help is greatly appreciated.Linda S.

The channel balance is stamped w/#2830. 29"x 1/2" x 5/8". What is the swisco part number that will work for this. Pivot shoe I believe is # 15-105, correct?

Hi, The Pivot Pin broke.Here is a picture of the other one that didn?t.No name on window The window does have a label which I will take a picture of.Please help I have had my window like this for 8 years.Thank you

This is the part mounted to the bottom of the tilt in window. The ends were cut off by the previous owner, now they will not go into window slide.

Hi, Would you please help us to identify our window channel balances? These are about 40 inches long with 23inch springs. There are printings saying 40SP 30 bsi on the side. Pictures are attached. Thanks!

I have a rather large sliding wood frame window with these wheels under them. One is totally crushed so the window will not stay in place. I would like to replace both of them on the window. Unable to attach image. part is about 3" long and .5" wide