Viewing all customer Discussions for:

Door & Window

I would like to know if you sell this window part

window latch plastic just keeps window latched closed I need 20 of theseAllen

hello, i've replace the getty operator parts on my windows a few times now. unfortunately, living in san francisco, it's always a bit windy. the back and forth force on an opened window eventually wears down and then strips the gears in the mechanism. 1) is there a stronger alternative for this op ... (cont.)

HI,My front window sash is broke but I don't want to remove it until I have the replacement part on hand. Can you identify what part number it is from these photos I took while it was installed? If so, thanks in advance for your big help. I will likely order 2 sash springs if that will be better ... (cont.)

Window balance 1/2 x 9/16 x 22 ?

I need to remove the stationary panel of this sliding patio door, in order to move in a fridge. How do I accomplish this without destroying the door and/or frame? Matt.

The number stamped on the balance unit is 14 5 fu cmc 2I need 2 balances for my single hung bath window. Thank you Everet

These windows are about 13 years ago from 84 Lumber.

Where to measure from and to for length

This part is where the window mounts into frame to allow window to slide in the tank as well as leaned in to be cleaned.

Broken window balance. Window installer has gone out of business and I'm trying to find a replacement part. Patent #s listed on part: 5.232.208 5.365.638 6.584.644 B2 4.610.108

The number on the crank is 21550 I need one crank with handle. I also need a new lock with handle. Would your company have it?

do you have the part I need?What you requested from middle of hole left to right is 4.75?

Channel balance replacement for 2420...

Hello, We have a vintage window in our kitchen that is 39" wide and 34" tall. All I can find of the old operator is the 15" arm that does not have any numbers on it. It just says "Anderson" We looked for some sort of info on the glass corners but all we found was A/W logo with "CV" etched in. No num ... (cont.)

Hello, I'm looking to purchase a non tilt balance , metal bar is 25 3/4 inches , adding the plastic pieces total exactly 27 inches, they are several similar style on this website, can you help me confirm which one is the correct one? thanks

I need two counter balance and one stop clip. The lip I need is in picture 1433. Number on balance 1520.lenth 15 7/8" Thank you. Dean

I have a broken door. The internal lock mechanism I believe is part 82-225 but there is a broken plastic paart in the first and third pic that I can't find. Also there is a slide lever in pic 2 that should lock the internal lock so you can't move the lever to unlock. I don't know how that connects a ... (cont.)

My sash has the numbers 1600-17 519 J81 1292 on it what would be the correct repacement?

Do you have Anderson Roto Operator part number 0333908 and handle 0536011...this is for an awning window vintage 1973...if so please provide pricing and lead time...I need 2 of each..Here is a pic...15" to center of pin fr bend in arm ... also note it is 4-1/8 hole center dim.... thanks... this wind ... (cont.)