Viewing all customer Discussions for:

Door & Window

Hi ... we have crank casement windows in our townhome. Previously you guys identified new cranks and handles for our windows (which were perfect). Now on our 2nd floor windows the black piece that Roto Single Arm Operator, 13-1/2" (right and left) snaps into on the window has broken. I have enclose ... (cont.)

Hi There, I need 2 channel balance with a custom size for a non tilt milgard window.. see pictures attached.

Hi - I need to replace the right and left sash balances for two windows that are approximately 30 years old. I removed the old sash balances (left & right) and it looks like the numbers are slightly different.One is: F54 9#27 5 87One is: F59 9#27 5 87What would be the correct replacement partsTh ... (cont.)

Is this the same as your 55-172, it measures the same. It is off a 1993 mobile home.

Looking for replacement parts for this

PPG Herculite patio door. 34 1/2" long Outside groove 1/2" deep, inside groove is 1/4" deep. They are 2 1/8" apart.

I have two counterweight spring assemblies, right and left, for a single window. The metal part is 28 " long and 5/8" by 1/2" tall and wide. I would like to buy a pair of replacements. The windows appear to be made by Alenco.

The channel is 27 inch long by 5.75 inch wide and 6.20 inch deep

I need six PAIRS (12 [pieces) of this part. 1/2 inch thick. The metal part measures 28 inches. If I include the white plastic ends, it measures 29 inches in total. The ONLY markings on them are "2730 P". Can you advise?

We have a single pane aluminum store front door missing what I believe is called a door stop? This is the one we took off the bottom of our door for reference. It?s a vistawall and we are guessing from the 80s early 90s? Any help on suggestion of replacement part is so appreciated!! ... (cont.)

This is from an Alcan window slider. It sits on the bottom of the window across the whole width. It's seems to be made out of hard plastic or vinyl I would like to get enough to do two windows

Hi,I am in desperate need of these two rollers. Is there a difference in front and back? Please let me know as soon as possible. Thank you, Debbie

My Pella casement over the latch does not have two screws as shown in your video. How do I remove the casement without breaking it?

Do you carry these plastic window screen springs?

After visiting your website, I thought I had ordered the right parts to repair the frames of my window screens. I ordered Item # 95-112 thinking by its description it was correct. Unfortunately I was wrong.... I'm attaching a picture showing what I need hoping you will have something like this in ... (cont.)

Do you know the correct part for pivot shoe I need? It is 1 1/4 wide and more than 0.5 inch thick, 17/32 or 9/16?? From the photo, The shoe I have is with center tooth, Can I use the shoe without center tooth? Is your shoe compatiable with other brand of spiral balance? also how can I tell that I ne ... (cont.)

DNS INDUSTRIES.12INSIDE PULL-1400SERIES

Hi Need replacement for sash balance - single hung non tilt window. Photo's attached. Thank you Ray

Hey, I'm looking for help replacing this window channel balance. The aluminum measures at roughly 25.5" in length, and hopefully the attached images are sufficient at capturing the plastic end pieces. Thanks

Window parts