Viewing all customer Discussions for:

Door & Window

Need a lock for traco sliding door. Lock is lost. Holes spacing is 3-7/8. Lock hole is 3/4 wide. My keeper looks like a 82-214. The hole on the door is 3/4 wide, that's a 82-211 from your picture online. Thanks

11600-17 33 BF2 10#31 4-16

Can someone please figure out which part I need to fix my window?

I'd been looking for this vent latch for a very long time at local hardware and window stores, even the manufacturers website...al to no avail. Then I stumbled across SWISCO and I'm so glad I did. I am a cautious sort by nature and order a pair of these latches to try before I got all 48 pieces. The ... (cont.)

Looking for replacement part

We are located in Toronto, Ontario, Canada, and are looking for spring balances for wooden single-sash windows (non-tilting) installed in 1954 when the building was constructed. We would need a minimum of three balances (preferably four) for the two windows, since there is only one balance ? i.e., ... (cont.)

help me identify this window part please, thank you

Hello,I have these blocks to hold the window open and the one on the left side of the window is broken. Please let me know if the dimensions sent on the last two photos are enough to identify the part. Thank you,Fernando

U get one chance to get this right. These are the screen doors rollers from the international space station. I'm sure u know that it gets hot and muggy in the station so the astronauts like to open the patio door. Currently they cant. Can u I'd these please.Cordially yours,Buz LightyearAka David ... (cont.)

I need replacements balances for a Malta NW82 vinyl tilt sash window 28" length

to avoid removing window, can you advise what lenght and weight needed for: 35.75"h x 34.5w panel thanks

In my original email I asked if the 39-389 opener would work on my 1960 version of the Andersen window. Notice the distance on the tape from about the center of the swivel gear to the end of the operator arm. It looks to be about 17". When I measure the total distance between the knob on the left ... (cont.)

Hello Swisco. Can you match this. I have new left hand but need opposite as picture of window shows. 9 1/2 ?. Truth. The # on left one is 40050 but need opposite I see pictures in your inventory but screw holes are from opposite side. Thank you. Bob Wambach.

Need a replacement casement crank for a Pella wood window. Windows are probably from the 80s. Thanks

I need to purchase a 27" Series 390 Channel Balance to replace one that has broken on my window. I checked the balance and it has no marking on it denoting the stamp option. How do I determine this?

I'm attaching pictures of the old and new weather stripping. Also of the door to show the gap between the paradoors, almost a 1/2". I tried the Swisco 58-161 but that doesn't cut it, as seen in the photos. New stuff is on the left, older on the right. The 11/32 track seems to match but I think a hei ... (cont.)

Looking for this piece. It hold the screen into the window. Could not find a manufacture of the window. It is a wood/aluminum window. Any help would be greatly appreciated.

To whom it may concern,I'm sourcing for parts for a series of tilt windows in home being rehabbed. I need the following items:-balance- handles -feltThank You,Oye

i am having a hard time finding the right handle for my door...the latch for the lock is on the inside of the indoor handel and the hole in the frame is on the inside track and not the middle...the holes in the lock are 3 13/16

Hi Manuela I am looking for a pair of 12" balance springs for a non-tilt sash bathroom windows: 19-005 Top15-002 Shoe11-2 Stamp on the current balance springs12" Length of metal between shoe and top1/2" Channel Width Please let me know the cost and availability of this product. Kind regardsSara ... (cont.)