Viewing all customer Discussions for:

Door & Window

I am looking to install a lock for our Milgard sliding door. Enclosed please find pictures of the door handle assembly that came with the door. The door was installed in 2008. It appears that the following assembly is a good match, 82-081. Please advise exactly what parts I would need to purcha ... (cont.)

please let me know your part number. Mine is stencelled with "UB 28F" and engraved with "28F" on the opposite end. Thank you. Paul

I believe this door is called the Series Summit 8670 Sliding Patio door. I had a locksmith attempt to install an external keyed lock onto the handle but he tried and said it wasn't do-able - that it looked like a standard patio door but is not and it just didn't line up with the part I ordered from ... (cont.)

Help! Over the years (about 40 years) these glazing strips have dried out and deteriorated to the point they are coming out or their tracks, especially at the bottoms of south and west facing windows. We need to replace them. Can you help us?We believe these aluminum frame windows were manufacture ... (cont.)

Recessed sliding door pull made by Reliance, Tokyo part #C-42 overall length 7 1/4 x 15/16. Screw holes are 6 5/8 center to center. Do you have a replacement?

I have Ducana Double Glazing fitted - about 40 years old.I need replacement parts and hope you can help.1. The metal bars which fit into the bottom of the window and go into the swivel part of the frame - some have broken - do you have replacements?2. The plastic part at the bottom of the spring loa ... (cont.)

Hello, Our Row brand double hung window was not able to stay open (would slam shut if you try to open it). My husband took the bottom sash out and noticed there was a protruding piece missing on the broken part(pictures above) that he removed. The piece missing was like a tiny post. This part is o ... (cont.)

Do you have a hinge that will work?

I have two sets of patio doors, SGD-R-35-72X80, that are very difficult to open and I believe the rollers have gone bad (14 years old). When I raise the doors to remove them there is not enough clearance between the top track in the bottom track and I cannot get the doors out. It's as though the doo ... (cont.)

Are these pulls metal? Also what is there width?

Good morning, I need to find the sliding window tandem roller to replace the ones for the 7 windows I have at home. I believe they were bought in 1997 when the house was built and the windows were made by ga windows. If you have this part for sale please let me know. Sincerely,Daniela ... (cont.)

Need to replace the weatherstripping in a Pella sliding door approximately 10-12 years old. Please advise what product I should order. Thanks

Looking for part #20755 and #20545c I bought operators from you #39-155 and #39-156. They worked great.

Need part numbers for a pivot bar and I need pivot lock shoe Thanks

Good morning I just want to make sure that I'm ordering the right top sash guide is it product code 18-047? Please help thank you..

Attached is a picture of the right side window crank assembly I would like to replace.I need both the left and right side assemblies. Do you have these parts? I could come to Camdenif necessary, but maybe you can identify it.Gary

Looking to rebuild 4 of these windows with balances, and other hardware to make them function properly.Thank you in advance,David

I would PRIMARILY like to replace the brass colored INTERIOR hardware with more modern white or stainless steel colored handle and latch in order to fit in with redecorating. The locking mechanism still works from the inside, but on the outside although the key turns in the lock, it does nothing to ... (cont.)

I am looking for a replacement part for a barrister bookcase door. It is a plastic piece (photos attached) which attaches to the frame of the glass sliding door. The bookcase dates back to the 1980s. Any help you can provide is appreciated.

I have tilt windows made by Ideal Mfg Co. I would like to replace the spring balances:six 23 X 3/8 and six 27 X 3/8tool to turn balance 75-033There are red bushings at the end of the spring tension tubes.