Viewing all customer Discussions for:

Door & Window

Need to find qty 2 locking handle sets for Peachtree sliding glass door Mounting screws are ~5" apart.

The part needed is for the outer edge of the bottom sash of Gorell windows. See the two photos. The bubble is 1/4". The stripping is T-shaped, with the outside strip at 7/16", the inside strip at 3/8" and the depth at 1/8". I will measure the quantity needed if you can supply this part. Thanks for ... (cont.)

Need information on balance assemblies for Simington Single Hung windows. I have included a couple of photos of the assemblies. The springs are 1/2" wide and there are 2 springs per balance assembly. The lower parts of the assemblies are OK but the springs and upper portion of the assemblies are b ... (cont.)

Seems this badly mangled shoe is only 1 inch wide. Measures 0.540 depth with dial caliper I've ordered a couple that might work, but still would like your input

I need S795-26 balancer but with a hook clip as seen in attached photo. Bob MSI

Can you help me select the right balance for my missing ones?

I am looking for a window grid clip that snaps into the window and holds the grid in place, see picture. I don't think I need exact one but something with similar operation.

Hello, I need your guidance in selecting a spiral balance and bottom sash bracket. These are for Mercer non-tilting windows. The existing spiral balance is 3/8" diameter, the tube length is 36", the rod extension is 5/8". The nylon bearing is degraded and looks to be a gray color (photo attached ... (cont.)

Hi, my sliding glass door handle just broke. It will no longer lock. My door says HERCULITE on it, so it sent me to you when I searched it. I need a new lock, but I want one with a key this time. I am not sure what I need or where I can go to find it. If you can help, that would be great. Thank y ... (cont.)

I have several windows with broken sash parts. When looking at the windows Channel balance look too long. The balance top part appears to be 19-002. The bottom 15-001. The rail is marked 2140 and is 22" long. The window is 22-3/4 high so I think the channel balance is too long. The window weig ... (cont.)

The holes on the operator are 5" on center and the outer part of the arm is 4 1/2" (see photos)

I need a replacement channel-balance and a few "take-out" clips to replace one broken one I have and to have a couple of spares just in case. The broken Channel balance is a half-inch wide by 29 inch long [plastic tip to plastic tip]. Markings on the damaged channel balance read: 27 3 JT CMC 4 ... (cont.)

Does this have a set screw and/or is it round or hex

Please see attached images. I believe they match your 377 series channel balances with top 19-018 and shoe 15.005 I measures 18 1\ 2" and they are marked "1820". Please send me a link for these special orders. I need 8 in this size. I also need 8- 24" length marked "2320". I believe these ... (cont.)

how do you remove broken takeout clips????? both side broke off. is it possible to install a screw into balance,instead of clip?

These windows were originally purchased at Northeast Supply in West Warwick, RI around 2004. I called them and they forwarded me to another company that deals with parts. They told me the name of the company that manufactured them, but I forgot it--and they're our of business--so much for that lif ... (cont.)

Hi, I'm looking for tandem roller assemblys for a sliding glass door. The rollers are rusted and won't move. I am able to remove them from the door. It seems like the rollers are 1" in diameter. I cannot find any stickers or plates with manufacturer. I did find a silver sticker crumbled up insi ... (cont.)

Can you help me order this item?

Looking for replacement pivot pins for a tilt out window. The only identifying mark on the window is a GA located on the latch.

In 2016, I had to replace the original balances on my Patriot windows. I upgraded to the S795-28 balances as the originals balances were not strong enough for the weight of the windows. However, now the shoes are breaking or separating from the new balances. As this is a vacation home, I am surpris ... (cont.)