Viewing all customer Discussions for:

Door & Window

Dear sirs, On page 12 of the pdf I've attached, has this roller model number below. And I could be wrong, but I think this maybe the correct one. Can you please advise? Thank you so much! Best regards, Jonni

The two photos show original (silver) and replacement (beige plastic) hardware for this window type. Replacements were made by others. I cannot find any markings on the hardware except some circles. The size is 4-1/2" x 2-1/8" plus the flanges. There are four sashes per window. Some of the existing ... (cont.)

Hello Swisco Crew! Pete Rose here from Home Hero Handyman Service in Philly. Good friend of the infamous Mr. Paul Pallas. Hoping your team can help me figure out a replacement handle for the above referenced patio slider. Total length top to bottom is about 7.25" LMK if you can help me ... (cont.)

They are Weather Shield Casement windows from around 1998. I included the numbers on the windows in the pictures. We need the plastic pieces that go around the locking bar.

I have a customer that has a storm door watch came with the house when he purchase it. The handle is not working correctly and needs to be replace. I have looked on the door and have not found and information about the brand. I have photos of the handle both inside and outside. your assistance wil ... (cont.)

Interior Lock Knob will turn but mechanism does not unlock door. Door was installed prior to home ownership so I don't have an exterior key. Cannot enter or exit door due to permanently locked. How do I repair lock mechanism or purchase new parts or the entire unit? Thanks much.

My wife and I bought a house in North Carolina, that we knew had some issues. One of those issues is the windows. They are the double hung variety, and many of the upper portions slam to the bottom when the lock is disengaged. I thought it would be an easy fix. But, finding parts has been a p ... (cont.)

From looking at your photos appears most like the 23" SERIES 385 CHANNEL BALANCE Product Code: S385-23. stamped "22 C" Do you agree? Or could it be S380?

I cant find this pivot bar that is on my spiral tilt balance windows. numbers on the pivot bar: SB 1943 PAT. NO. 5704165

I am lookimg for a replacement shoe. For my window.

I need the lock, cover and Handle for Anderson casement window changing to white

4 roller replacements for mirrored closet door 448-3

The items in attached photos are original to MW casement windows that are approximately 13 years old. Number stamped on the arm of the operator is 31850. Need six operators for left swing windows and six operators for right swing windows. Also need to know what size wood screw we should use as ... (cont.)

Hi - We previously contacted Norandex for service on our Simonton window warranty repairs. It seems the balancers are broken in a few windows I have. Some pictures are attached. How do I identify the correct parts needed to repair? I have some neighbors looking to make the same repairs. ... (cont.)

CAN THE 40-131 BE USED ON BOTH RIGHT AND LEFT SWINGING DOORS?

Can you match these parts. the handle is broken (no longer fits into the housing) and the rubber connector is missing from the track. I need both a right and a left version for a double casement window.

Folks.. We have some older wood double hung windows which were installed at the time the house was built in the 1950's. I'm interested in replacing the balancers and if possible the vertical metal tracks the window rides up and down on... Please see the attached pictures.. can you help me iden ... (cont.)

the channel balance could not be pushed down below the window take out clip

balance measurements: width 3" depth 3/4" length of box 6-3/8" length of box with "stapled flange" 6-13/16" window age is approx 30 years+

Hi, I've included the part I'm looking for. I don't have any idea what kind of windows these are, but it looks like the holes are 2 1/16" apart. I've looked at local hardware stores but haven't found anything nor anything like it online.