Viewing all customer Discussions for:

Door & Window

Can you let me know if your Product Code: 26-226 is the same as the pic I have attached.

Hello! I am looking to replace the balances in my windows and having a tough time determining the difference between the 350 and 351. My tops look identical to both and I can't tell a difference between the bottom "shoe." Attached please see the best pic I could get of my current balances. I ... (cont.)

We need to replace this handle

This is for Acorn windows or international window. They are sliding glass doors. They clip in as apposed to screw in. Can you help identify.

looks like my old balance is 3/8" and the tube is 19 3/8 long (not including blue tip). Can I go with a new balance that's 19" - I don't see any half inch sizes.

I need replacement balances for an Alcan. The number the existing balance is 2920 can you tell me what replacement I need? Sorry I don't have a picture to send.

There are no markings on any of the sliding doors except for a date code in the glass of AUG 11 2004. I am looking to get keyed locks for (3) of these. Can you help me identify these? Adam - Wellington Services

My Pella Storm Door is 10 years old and just recently when opening the storm door mortise lock from the outside with the pella key, the key just spins and does not unlock the door. However the key still locks the door from the outside. The inside turn latch still locks and unlocks the door. How do ... (cont.)

Hi Need a pair of sweep locks for a Better-Bilt single hung window (circa 1995) Your part number 90-005 looks right but the screws in my window frame are 2 1/2 inches center to center. Can't seem to find exact replacement searching online. Brown, bronze or black would do. Thanks Regar ... (cont.)

Cole Sewell #07029794534 307 marked on the storm door EMTEK 322

Went to the local hardware store and found the kit for the door handle but was told the latch assembly was built into the door. I had removed everything because when you would turn the handle down the door would not unlatch. Since being told that I had to order it separately I figured I would do som ... (cont.)

In the pic I sent the bottom keeper snapped. The top one is good. I need a replacement. Would you have these and possibly one that's not plastic??

I have a broken Truth #30818 system. Does your #39036 replace this?

Have several of these broken on windows. Looking for replacements.

the balance I have has x 22 stamped on it--the shoe looks the same--will the 750 series work on the caradco dbl hung

I have a customer installed awning windows for and the hall is to narrow for the pole to be able get enough of an angle to crank it open. Looking for a spline with a double u-joint possibly. Attaching drawing of the spindle and the thought of the double u-joint.

How does the pop rivet attach this clip? Does it go all the way through the aluminum frame or just through on side into the hollow space? What diameter and length rivet do I need? Thank you

Do you have a sash tilt release lever replacement for a WS IGCC CBA 03 window? Thanks Geof

Hello, I have Andersen windows in my house. They are in great condition, except for strings. Looking at the sash balance I see the following numbers stamped: "5", followed (after some space) by "27" and in the corner "-1168" in smaller numbers. It's difficult to see them on the picture, but wi ... (cont.)

Do you carry the corners for Andersen screen latches?