Viewing all customer Discussions for:

Door & Window

This house was constructed in 1988 & has 6 each Peachtree Sliding Glass Doors. We are interested in replacing the single wheel rollers (2 each/door). The rollers are 1 1/4 diameter. The overall bracket length:2 3/8" with 2 flanges(1/2" x 3/8") on either side of screw hole for total length 2 5/8" ... (cont.)

The only marking I can find is a number stamped on the door. 1185-L and it may say CCMC above that. I like to replace the weather stripping around the entire door.

After viewing your library of identifying other's parts I have concluded I need a S395-27 with a 2630 option, but I have two questions. My balance shoe measures 1 by 1 1/16 by 1/2 and the two options I had are p/n 15-001: 1 by 1 1/8 by 1/2 and p/n 15-002: 1 by 1 by 1/2. Which one should I specif ... (cont.)

Left Hand Bottom Corner Pivot Housing 26-117 Right Hand Bottom Corner Pivot Housing 26-118 I need the part these fit into in the frame I think they are call cams

I am looking to replace both the right and left window balances in my Andersen Narroline window. Here are the stamped numbers on the Balances. D42 7#27 8-85 Other numbers on balances are: 11600-17; 1160-3; 3335455:

Hello, perhaps you can help me. I need to replace the crank mechanism on two (2) Hurd windows (1990 vintage). Both of these windows open on the left-hand side (or did until the crank mechanisms failed). I

I think the tilts are 143 and 144 Cant figure the springs out

The balance is 1/2" wide measures 29" and it is stamped in the metal 2830 the balance top and shoe are both wing type, the hook is the heavy duty type. I need 4 total for now. The windows are for a condo complex built in 1988 in Sicklerville, NJ. The group that I do work for own roughly 15 condo uni ... (cont.)

I need help identifying the attached parts so I can place an order to repair my windows. I have about 8 windows needing new channel balances. These photo show two marked 2230 & 2820. Can you tell me what series to order? Thank you. Jay

Here are a couple of pictures of the hand crank we need - they are metal, gold or brass in color and have the # 45054 and 29 on the underside of the crank. They also have a 'set screw' on them. We will need several of these - if you can find them I will count up the number we need. Thank you ... (cont.)

My 28" balance is stamped 27-C. Does that correspond to 2730 as in ABC vs 2710, 2720, 2730? If this doesn't help should I take a sash out and weigh it? thanks for your help, steve

Hi we have single hung patriot Windows, 23 years old. This is the tensioner - 30 1/2" long. Do you know the part or where to get it?

Hello, I need to replace four lower balances. The existing bushings are dark blue in colour and broken. the lower windows weigh 21 lbs each. I am assuming that when your literature refers to charging the balance that would be the same as "pre-loading". I will be using 2 pliers to accomplish this. I ... (cont.)

Hi! I am working with our church to refurbish about 20 Pella windows from the mid 1980s. Most (if not all) of the latches shown in the photos have gotten loose to the point of unlatching on their own. The exception seems to be a few that have a spring loaded retainer button. Can you supply repla ... (cont.)

Hi- This casement operator has a 9" arm and is metal. Seems too sturdy to be aluminum. We need the right hand replaced but depending on price may also do the left, to be safe, as it is also original. Not sure which to order due to the mount placement and limited space between the mount and the ... (cont.)

Do you have anything that can replace these channel balances? Please let me know Thank you very much. Pat

I was given these part numbers.. FA2830 and FA3540. Hope this helps. One measures 29 inches and the other 35 inches. 1/2 Width.. Non-tilt window Arturo

Please help me find a lock with key for outside

Window balance #2220

Hello, this part is a plastic cap that sits on top of the window sash on each of the top corners. The cap engages with the spring, and helps to counterbalance the window. These windows are from a new construction home built in 2003. The part is a plastic piece, it screws into the window sash ... (cont.)