Viewing all customer Discussions for:

Door & Window

Have a Guardian sliding glass door about 7 yrs old that latch is worn out on. Could you please help me match part? Thanks.

I need to order replacements for two Caldwell window channel balances as follows (photos attached): Stamped: 23 4 Caldwell IM Sash Non-tilting Sash weight 20 Lbs. Channel length: 24" Channel width: 1/2" Very similar to your searies S380 or S385 Top appears to be a 19-005 Shoe appears si ... (cont.)

Can you help me with this roller

Hi, I'm looking to replace the parts below from a Windows Factory window that is roughly 14 years old. Pivot Shoe Patent #: 5.704,165 Height 1 7/16 Width 1 1/4 Thickness 9/16 Pivot Bar Length 4" width 5/16 Thickness 4/16 Tip 3/4

Windows were installed 1997 (vinyl slider ) left hand side part needed. 3.25 long, 1.4 wide, depth .4 inches. There is a number 2634 on the part.

This balance came from an Anlin single hung window. The measurement of the sash is 40 x 27 inches. The only markings found on the balance are (7+7) Not sure what they mean. The measurements of the part are 9/16 and 1 1/4. Just like the ones in your images. I am also going to need the pivot bar wh ... (cont.)

This roller looks just like part #81-138 from your website. The only difference I notice is that my wheels measure 1-1/4" (outside diameter) and the wheels on the listed part are 1-1/8". My roller is marked "DELMAR HARDWARE TORONTO." Can you help me locate the correct replacement part? I'd like to o ... (cont.)

Hi, I have a crank assembly that looks almost identical to item 39-142, but with a 13 1/2 inch arm. Do you carry an item like that or know where I can find one?

Do you have these available LH FOR both?

I need 2 sets of latches if you need more information please call me My name is Ephie.

Hello, My house was built in the late 50s and it has a million windows with this type of hardware. see pictuers. I need an elegant solution. I am a woodworker. If you have direct or identical replacement parts, then great, but otherwise, i see some beautiful rod constuctions. What woul ... (cont.)

Hello, I have three tall anderson crank windows. (see photos). They have: 7073B L 90 7073B L 90 7073B R 90 The L and R seem to correlate with the left and right. I know that sounds obvious but... What should I buy from you guys? Mark

I have custom screens on my home that need to be replaced. We have taken the frame apart and the only thing we need are the corners to repair all the screens. I cannot find the corners. They are Bayform DP307078 /RD63647. Do you have these corners or know where they can be found? Is there a corner t ... (cont.)

I'm in need of several of these pivot lock shoes that goes with pivot bar product code #26-218. A 600 series spiral balancer 5/8" attaches to it. I have ordered several items pertaining to the windows that they will repair from Swisco and am hoping you can help me obtain this item also. ... (cont.)

I need 4 of these balance rods for 2 mil guard windows.

The part stamp reads 3020. I have no idea what company. The non-tilt windows with this spring balance have it on only one side of the window. The channel balance broke through the top cap. Additional parts needed are the take out clip and sash guide. I presume the channel balance comes with the top ... (cont.)

Cole Sewell Case #71088 I need a door handle replacement - thanks Jerry Sovell

I've attached three photos two of the balance sash I believe the tip was black but the tip is not there I have the length is 29 inches and I see the number is BQB spaces 1 I need to know what to order I also attach the photo what I believe is a privet bar for a vinyl tilt window by Kinro and do you ... (cont.)

Can you please identify this pivot bar and window manufacturer? I have tried your model 26-378, but will require some work to make it do. The dimensions are right, both overall and hole spacing, however my pivot bar holes are tapped to accept 6-32 screws. In addition, as you can see in the photos ... (cont.)

I am looking for a replacement shoe pivot. I believe it came from an alside window. It had a spiral balance.