Viewing all customer Discussions for:

Door & Window

I'm a general contractor and can't fine any names of manufacturers on theses windows

From looks and measurements I still cannot get a good read for this coil balance shoe is it a 15-177 or a 15-208?

Hello, I need replace met parts to match the pictures attached. I need the pivot lock shoe as well as the coil balances shown. These pictures are are from the window on the right of the window that has the broken parts. I have also provided a picture of the label on the window. Pulte Homes install ... (cont.)

Hi there! I'm trying to find the part pictures which attaches to the top of our sliding screen door. The wheel is 3/4". I have not found any markings on the door itself or the parts. Appreciate your time! Best, Emil

The sliding clip that mounts to the rail in the frame broke. I need to replace the whole top hinge mechanism. See attached pics.

There's a plastic gray rod goes in black plastic bottom piece where window goes in . Runs on spring and attached with skinny rope with screw at top. No adjustment screws. Top of spring is a white plastic part the holds spring and rope. Window doesn't stay open. Was in house when purchased in 2005. ... (cont.)

Hi I am looking for the clips for my pella screens. The windows were installed in 1986. I have attached some pics. Thank you.

Hi, can you please help suggest replacement parts for this double coil balance and shoe? The coils broke and the shoe pivot also had a plastic piece break.

The hinge part that attaches to the window and slides in the bracket has broken. Can I just purchase the plastic hinges? The rest of the parts seem to be working properly. Thanks, Jim

Trying to ID part numbers for Truth casement window hardware. Is the part number stamped anywhere on the hardware?

Window Dimensions 45 11/16" W x 35" H Weight = 37.6 pounds Make: Milgard Balance: Stamp: 3265 Metal length = 33" Depth= 5/8" Width= 9/16"

Stamp reads 2120 and CH, measures 22", not sure which series I need

I need two of these replacement parts

See attached pics of installed parts. Haven't removed them yet since top portion of window still works. House built in 1990. Need to replace both window sash balancers and can't find the exact part numbers. Looks like both my right and left have same part number. Please let me know which parts I nee ... (cont.)

Sorry no marking I just know it's old and I need to replace it it's not cranking

hello. i need a tile latch part. left and right. the widow lock part said mastic. see photos with dimensions. LMK if you need anyting else.

Need replacement parts and help identifying pieces

Hello, I searched through your tilt latches and was unable to find the exact dimensions of my window tilt latches. I live in florida. These are older windows. These latches are on the top vcorners of the windows and are surface mounted. The dimension between the screw holes are 1 1/8". The overa ... (cont.)

The screw on one side pulled loose and doesn't remain in place when window is cranked open or closed. On the window locks are the letters P.G.T. on top of the lock and Venice, Fl on the bottom of the lock. The stamp on the arm is no longer legible.

I am looking fo matchibg pivot shoe for my tilt window. Can you help identify the matching ones.