Viewing all customer Discussions for:

Door & Window

Hello I have some channel balances that need replaced. The one is stamped 26 3 EQ and the other is wore off. The one that is wore off is 16 inches long. ( 2 different Windows ) the 26 3 EQ weighes 20 lbs and the smaller window weighs 12 lbs. please advise which replacements I need. Thank you very mu ... (cont.)

I am looking for replacement rollers as shown below for a patio slider. Manufacturer is Wasco, Sanford ME. Can you give me the parts if you carry them. Thank you. Al

Can you identify this window coil balance? The plastic cam is broken, I'd like to find a few replacement assemblies. Thanks! Doug

I am replacing channel balances that have a stamp that reads 26 4 BN Caldwell. It looks like S390-27 will meet my needs as the shoe is 1 1/8 inch. It seems option 2640 is the right choice but my windows only weigh 16 pounds. Should I be choosing the 2630 instead?

Hello, I have attached pictures showing the hardware I need to replace on my sliding glass door. The thumb latch which operated the locking mechanism sheared off. The frame is a light beige in color. This is the only door to my back yard so it gets used a lot. It was always difficult to lock-had ... (cont.)

I am not sure which weight and model option I should replace for this milgard window balancers that broke. They were installed in 2005.

I need Nylon Screen Door Rollers (4) and it is a match in every dimension as the 84-095 What your not saying in the description is if it has a spring inside the Rivot Point. The one I am in possession of, when you turn it over is spring loaded. This I am sure as you know is to apply tension on th ... (cont.)

I'm looking for the spline for an aluminum storm window. The present spline is approximately 5/16" wide and fits the frame shown in the attachment. The existing dimension appears smaller than the spline shown on your site. Thanks for your help

Need all of the parts

Need replacement glazing for yale ogron window. If it helps, we use the 351 style balance w/ 19-002 & 15-002, it also uses the Yale Ogron vent guide.

The first picture is from the bottom of the balancer assembly on the inside (bottom window) track. The twisted metal goes up into what looks like an aluminum tube that has one screw at the top mounting it to the window frame. The second picture is just a cleaner picture of the bottom of the balanc ... (cont.)

ref: awning closure 39-025. I recieved parts as ordered...installed one works well...second one i attempted, awning window doesnt close all the way. I did lose a bushing that goes in crank hole...and you sent no screws or bushing. could the lack of the bushing prevent closing if so, how do i obtain ... (cont.)

Hello Swisco, Can you help us find the right clips for these windows? We have the balance rods and installation tool, but are having trouble finding the clip that locks in the balance rod on the underside of these builder grade windows. The sashes are not removeable. Pictures attached of t ... (cont.)

Please help me ID these parts Thanks Dante

Hello, I am in need of a dozen window balancers. I believe your Series 700 supports will work for me. I have non-tilt windows with old balancers. The pictures I'm sending are a little rough. The only identifing marks are "15 JAPAN" and "19 JAPAN." They do measure 15" and 19", and measure 9/16 ... (cont.)

need to replace my Right hand dual arm operator. The measurements I have are as follows: Mechanism is 5 1/8" X 2 1/4" Short arm is 3 3/4" (it has 20755 stamped on it) Long arm is 8" Please advse product code. Thanks Steve

I am looking for the vinl strips that hold the glass and screen into my storm door The storm door is Cole Sewell reg #10219994539 0022 Can you recommend the replacement part for this?

Do item 26-116 come in a bigger size. This is the style pull handle I need but not long enough

Looking for the part catching the chain in a skylight operator. As you can see in the pictures 2 of the ears are broken off. I am primarely looking for that wheel as the rest of the assembly is fine. The number printed on the piece is 30654. The window itself in approximately 25 years old. This is a ... (cont.)

Anderson screen corners white in color