Viewing all customer Discussions for:

Door & Window

Good Morning, I'm looking for the following part for a kinco inc single hung non-tilt window stamped with (90-2) . Sash is in perfect condition but the plastic tabs that hold the window balancer in place are completely broken off. I need 4 I believe they are 9/16 (28.5-29 inches tall). ... (cont.)

Having trouble finding this time of product in my area. Can you recommend anything? Two images attached

This pivot bar slides back and forth so that it comes out of the shoe and my sash won't stay in. When I tighten the screw the the channel that the bar is in, slides back and forth.How can I fix it?

Broken coil spring. Part no. 801020. RH facing window

In the photos the spiral balance is 9/16" thick. Has a blue tip. Measures 35" long. Is this P/N S600-35? The S600-35 shows a red tipped end, not a blue as I have. thanks!

Trying to fix 1970 aluminum windows that the spiral balance has gone bad. The spiral drops to the bottom of the window frame. Closest thing I find is the S400-20. Would also need the appropriate bracket or attachment for this.

Can you please tell me the replacement part I need to order for this window latch? I need a left and a right one. Thank you,

I have a Kassen and Keller awning window that needs a new crank mechanism. The crank will open the window but not close it. The model is a Kassen & Keller 700 slimline awning window that was installed in 1997. Can you help?

I wanted to know if you had any parts for my window. Its from the 1950s. Id like to restore rather than replace.The coils are a disaster and i can't open or shut the windows very easily. I think the black plastic balancers are broken also. It takes 2 different types. On one side there are 2 long bl ... (cont.)

Top sash guide identiciation

I am refinishing the 1930's steel medicine cabinet; to my dismay the spring mechanism that allows the mirrored door to remain closed has lost its 'oomph.' By using your website, I was able to learn its name. My question is how does this mechanism get replaced? I measure approximately ... (cont.)

One of the lock mechanism hooks - upper- does not engage.. Where could we buy?? TY

This is a channell for a double hung tilt out window. The channel measures 27" It screws to attach to the top and has a small metal clip at the bottom of the string to attach to the window gluide. There is a block and tackle inside.

I purchased a patio door handle (82-262). There were no instructions with the handle, and there is a curved piece of "spring steel" with the handle. I am not sure how that is installed (the previous door handle was missing, so no reference). Can you help this?

I looked through your website, but did not seem to locate the specific color and size for the pivot balance lock. Can you confirm if you carry the following size: 1/2"x 1 7/8"x 7/8"? I've attached a couple of pictures for reference. Thank-you for any assistance you can provide.

Hi was wondering if you had a "Bottom Expander" for a Pella Full View Storm Door. I don't have a part number, it's the weather strip on the bottom of the door. It has some screws on the bottom inside of the door and has 2 Black Strips on the bottom/down of the door. I wanted to ask if you had it b ... (cont.)

I am looking for this part. I have a window that I am unable to lock because this plastic piece is broken.

Do you guys have this part ?

Hi. Please pull this order 708579 to view the picture of your Peachtree Sliding Glass Door Roller, 81-071. The pivot point is in the OPPOSITE location than I need. Do you have the exact same roller with the EXACT same measurements with pivot point in the opposite location?? *Here is the pictur ... (cont.)

This is for a older door at parents house... hopefully the measurements are what you need to find a replacement. Thanks. Mike K.