Viewing all customer Discussions for:

Door & Window

Good Morning: We have just moved into a new home with a few windows needing replacement parts. I have identified one part (I believe) as Pivot Bar 26-021. All dimensions match except mine has three holes where your part has two. I am unable to locate the other part and am hopeful you can ass ... (cont.)

There is a capital "M" in the middle of the back of the part. There is on the back at the top the following marling: PAT# 15139.291 I need both left and right side latches Thanks!!!!

Hello, I need to buy some of these locks. Please let me know if you can locate them, Thank you

don't know roller size 1&1/8 x 13/32

Hello,I bought some used vinyl windows with non welded corners so I could disassemble them and make them smaller, about 20 5/8" wide and 36 5/8" long. They were about 28" wide by 53" long. They will be oriel style. The top sash will be about17 1/2" by 23" and the bottom sash will be about 18" by ... (cont.)

39-025 What is the length of the second part of the arm that attaches to the window link?

I'm struggling with trying to find and order the window balances I need. They are tilt window channel ribbed balances. The channel from metal end to metal end is 24" long, 9/16" wide and 5/8" deep. The channel is stamped with 23HD and B.S.I. on it. The top has a 1" long s-clip which attaches the top ... (cont.)

Would you be able to provide with part numbers for the below window crank handle and the housing to go with it?

Hello, I've got a broken casement window handle where the gear/crank came out with the handle. I assume the whole unit needs to be replaced? The right arm itself measures 9 3/4", with the following id 31538A. The mechanism (attached to the window frame) has the following id 45179. I d ... (cont.)

Hi, 3 photos of vinyl window double hung. It is not a part from MI Windows and Doors. It may be from Patriot Windows. Can you tell from the info I submitted, and do you have the part?

Hello As far as the corners and rollers go, I will presume is part numbers 95-020 and 84-016. They are already in my shopping cart. Please tell me if I am incorrect. The problem that I am not sure about is the door handle. The very nature of this design of the original handle is bad ... (cont.)

Looking for balances for Jordan window. Stamped 2830. Top and bottom attachments appear to be Series 351. Windows were purchased in 1983 in Oklahoma City. Are balances available?

Looking for a replacement. The handle broke off inside of the opening mechanism.

I'm looking for a replacement part for a window crank. I've attached a couple photos, the only part number I see is 45002. The two arms connect to a guide bar on the bottom of the window. Can you tell me if you carry this part or something similar?

There is no identification on the windows as to the Manufacturer and have no idea when these windows were installed. Purchased the house in 2006. Took one of the broken guides off and the only ID is a patent #, 3444648 labeled L or R depending on which side they were removed from. Might as well r ... (cont.)

I am in need of a left and right mechanism for a double hung sash. Are you able to help me ?

Hi Do you have a beading to match this? Or something close that will work? Thank you John

I need to replace an alenco 24 inch x 3/8inch window channel balance number 2330 stamped on old alenco balance. Believe the S800-24 series 800 would be okay - not sure of the the weight A or B or C

We have old Anderson sashes and need replacement parts please The measurements are approx. 32x24 36x24 40x24, they maybe 2" larger. Can you Help me? Thank You, Ann ACR Glass

Hello, Do you think the attached photo is your item 82-238? The dimensions and appearance seem to match. Thanks