Viewing all customer Discussions for:

Door & Window

I am looking for replacement for the attached lock. Do you have anything? -Tony

Hello, I have pictures of the attached parts. Please let em know which equivalent I can order from you. We are needing to repair this window sash for a house to close and I have had no luck with local window and glass company. The upper sash came crashing down on the inspection, seems the bottom ... (cont.)

I need to order the right & left balances for my window: Number D33 7427 635 Opposite Side 11600-3 I believe the number is: D33 7#27 635 Approx. 6 3/8" X 3" X 3/4" Deep Please let me know what replacement balances to order. Thank you, Joe

It looks like the glazing is dried and starting to come off the window part completely. It's very thin and looks like it snaps in or sits right under the glass.Please help I am not sure how to fix this.Thank you

Wheel diameter 1.5" Please identify. Thanks. Denis Duhaime

I bought my house in 1968. It has spiral balances in one window, dating to 1966. The windows measure 52" W x 26" H The bottom sash moves up and down on plastic spiral 23" long, 3/8" wide. About 1/4" from the end, at the top, is a rivet to hold the balance to the jamb. It looks exactly like y ... (cont.)

I need 2 replacements for the following sash balances, but I am not sure what to order. Can you please help? 24DS BSI 44

I recently purchased a Split-Arm Operator (39-317) to verify if this would work for all of my windows. When assembling the test window I noticed that the extension arm (has 31550 stamped facing down) is underneath the main arm and I am needing this above to fit properly with the window screw holes ... (cont.)

HANDLE IS 5 1/2 " (H) BY 1 1/2 " (W) LOCK IS 2 1/2 (H) BY 1 1/2 (W) THERE ARE NO BRAND NAMES ON THE DOOR OR THE HANDLE I APPRECIATE ANY ASSISTANCE YOU CAN OFFER. JOHN

I am trying to locate a Milgard Window rail guide. The part is shown in the attached picture. The part is attached to the inside frame of the Milgard window and provides a guide for the window rails to move up and down. The rails are engaged by the slide handle to lock the window closed. I e ... (cont.)

Can you tell me based on these photos if your "truth" window cranks product code 39-315 is the correct crank. I know I will need a right and left not Scott

I need 4 Anderson sash balances for 2 windows in my garage.I had the balances replaced in the other 2 windows 2 years ago and kept one old one to order new ones if necessary in the future and the future is now.The old balance does not look like the ones you have for sale now in as much as mine ... (cont.)

If it was actually two sliding glass door sliding into each other not a wall would you need two different parts or two of the same? Is there a left and right model?

I am looking to replace both of these parts. One of the parts is broken completely. These are parts to my tilt windows. I have noticed that the windows are getting hard to open and close and they are only a few years old. PAT. #5,704,165 550

Hi, I want to build a few screens for casement windows in my home, so that I can reach through and pull the window closed. I am curious how your screen wicket attaches to the main screen. Is it with a spline? Glue? Do I need to order anything other than the 56-090 Thanks,

Hi, we placed an order for replacement patio roller, item number 81-011. We measured and found this item to match what we have but never noticed it had flat wheels. We need concave wheels. Is there a different item number for this housing unit with concave wheels? At this point, the door will not op ... (cont.)

MFR: SIL-1 series 1000 DH. I found out I have 5 windows in a tenants house where if the locks are undone the top sash falls down like its not hooked to the spring mechanism. I believe its related to pivot bars broken or falling out. Recently I had a couple of windows out (not the ones that are ... (cont.)

Hi, the top corner of our Atrium brand window broke off and we found a plastic part screwed to the top broken. Please help us identifying the part so we can order a replacement. Thanks! Best Brittany

Hello, my name is Charlie and I am from affordapro llc. I used you guys for a part a couple weeks ago and had much success. So here we go again. This part is at the bottom of a window that is about 20 years old. Can you check out these photos and tell me if you have this part? Thanks again. ... (cont.)

This lever locks and unlocks the slider. There are no markings on the door or hardware , other than the glass manufacture. Thank you John