Viewing all customer Discussions for:

Door & Window

Attachment of the latch mech for the American screen door follows: Please indicate availability, price and installation procedure. Latch dimensions are: 3 and three quarters high, 2 and one half wide, and approx. three quarters of an inch thick.

Hello, I have a Pella swinging storm door and I need a mortise lock. I see your 40-194 looks real close, but I have a couple of differences I need to iron out. The 40-194 has a "teardrop" looking hole, while mine has a round hole of 13/32" diameter. The 40-194 spindle square seems to be s ... (cont.)

Hi, I have an IWC sliding glass door with a mortise lock and black pull handles. The latch action is not consistent, so it does not always catch when locking with the key. I don't believe I need to replace the thumb lever. Can you confirm which mortise lock I need? it looks like I would ... (cont.)

Hi, please see the attached image of the balancer that broke. In order to avoid tearing out the side of the window, by desire is to open the replacement and tie in the existing rope from the window. Let me know if this is possible. In any case, please let me know which balancer will replace mine. ... (cont.)

Can the Complete Mortise Lockset 40-049 be installed on a 1 and 1/2 inch thick Andersen storm door to replace the original PADO lockset on the door?

Please tell me if you have this part -- I could use a handful. I don't see a brand on the window anywhere.

Might be Marvin casement windows. They were installed in 1980. Pictures attached. One showing profile with measuring tape, second showing piece in place with measuring tape.

After having the door lock rekeyed, the cylinder is now loose, jiggly and temperamental. The flat pin which protrudes from the cylinder and inserts into the door handle latch is floppy, meaning it has a lot of play. Consequently, The door latch is jiggly but appears to be in good shape. Have you g ... (cont.)

I have a storm door that needs a new lockset. i do not know the make of the door. maybe Anderson

black tip 17 inch 3/8 inch dia

Here goes, two pictures. I believe this is a 1979 Anderson sliding screen door that this comes out of (at least that's what the glass slider is - and the screen seems to match). Removing this part required taking the door frame apart. The adjustment screw is located on the side of the door. The r ... (cont.)

I have enclosed pictures of a shoe for my Acorn windows. They appear to be similar to your shoe posted online except for the top which has a different configuration The dimensions are: 2"x 11/4 x 9/16 Do you have apiece that replaces this shoe?

I've been able to determine this is a 770 Series.....just wanting to make sure that I am reading the 'B' code correctly

I have a balance box with the P/N E2 9 27P 473. Could you please advise what the Swisco part number is. I need both sides.

Need to find balances for andersen narroline double hungs 2-4/5-2 and for 3-0/5-2 These are circa 1989

I ordered part number 81-030 for my slider (generic door). The length and withd were fine but i need a part that is only 1 inch high not 1 1/4. do you have that size of roller?

Please help me find these rollers

Hello, I have a sliding door with handle plate cover 1" wide X 7 1/4" long with hole spacing 6 5/8". I want to replace it with a completely new inside outside and latch lockable handle.Mine looks exactly like your 82-002 lock. But I do want a pull handle on the outside instead of the finger grip sty ... (cont.)

I am trying to find replacement screen door handles/locks for 9 screen doors. The doors are large 4'x7' in size. I have found handles similar to what I need but none that fit a frame as wide as what my screen doors have. Photos attached. I have found no markings on them. Thanks.

Could you tell me which pline will work in my case? It seems the flat portion of the spline measures no mor than 1/4" - maybe shrunk over time?